Safety precautions
Follow these instructions.
To prevent accidents, injuries or damage to
property, please follow the instructions below.
■ The following chart indicates the
degree of damage caused by
improper operation.
WARNING
Indicates potential
hazard that could
result in serious
injury or death.
CAUTION
Indicates potential
hazard that could
result in minor injury
or property damage.
WARNING
►Preventing accidents
• Do not place within reach of
children or infants. Do not let them
use it.
-
Putting parts or accessories in the
mouth may cause an accident or injury.
CAUTION
►Protecting the skin
• Do not press the blade rmly
against the skin.
• Do not press the blade with
excessive force or insert too
deeply into your nostril/ear canal.
•
Do not touch the blade section
(metallic section) of the inner blade.
• Do not use this appliance for any
purpose other than to trim nose
hair, ear hair, outline eyebrows,
moustache or beard.
- Doing so may cause injury to skin or
hand.
• Check the blades are not damaged
or deformed before use.
- Failure to do so may cause injury to
the skin.
►Note the following precautions
• Do not share with your family or
other people.
- Doing so may result in infection or
inammation.
Important information
• Note the following precautions to avoid
malfunction or deformation.
• Do not bring the blade into contact
with hard objects.
•
Do not drop or hit against other objects.
•
Be sure to place the protective cap on the
head when carrying around or storing.
Parts identication
(Fig. 1)
A Head
1 Protective cap
2 Outer blade
3 Inner blade
4
Trimmings box
5 Water inlet
6 Water outlet
7 Wash switch ring
8 Filter
9 Exhaust hole
Before use (Fig. 2)
Be sure to close the water inlet of the
wash switch ring during use. Otherwise,
themainbodycannotprovidesufcient
suction power.
→Checkthatthemarksof“ ”,“ ” and
“ ” align.
How to use
• Cleantheapplianceafteruse.
1
Mount the head to the main body
until it clicks.
2
Remove the protective cap and hold
the main body so as not to block
the exhaust hole (a). (Fig. 3)
3
Turn on the power before putting
the head in your nostril.
▪Cuthairsusingthetipoftheouter
blade (metallic part).
▪The outer blade surface may get a
little warm during use, but
performance will not be diminished.
Note
• The use time after a full charge is as
follows.
ER‑CBL1:80minutes
ER‑CBN1:60minutes
(Basedondryusingat20°C–30°C
[68°F–86°F])
The operating time may differ
depending on the frequency of use and
the operating method.
Quick charge (ER‑CBL1 only)
Even though the battery runs out, you can
usefor5minutesafter3‑minutecharge.
(This will differ depending on usage.)
Removing and mounting
the head (Fig. 4)
•
Make sure that the main body is turned off.
►Remove
Remove the head while pushing the
head release button (b).
▪Stand the head when it is removed.
►Mount
Mount the head to the main body until
it clicks.
Trimming your nose
hair and ear hair (Fig. 5)
1
Insert the tip of the outer blade into
your nostril or ear canal.
▪Insert it slowly so as not to injure your
nostril or ear canal.
2
Cut the nose hair and ear hair by
moving the main body.
▪
Some trimmings may remain inside
your nostril or ear canal after cutting, so
remove them using a tissue or similar.
Operating Instructions
(Household use)
Nose/Ear/Facial Trimmer Head
Model No.
ER‑CNT1
1 2
3
4 5
6
8
9
10 11
7
ER-CNT1_US_PR.indd 1 2022/02/21 15:08:46
Loading ...
