Loading ...
Loading ...
Loading ...
keepthelineparalleltotheground.
Avoidpressingtheheadintothe
groundasthiscanscalptheground
anddamagethetool.
Mowing //
SWEEPING
The fanning action of the rotating line
can be used for a quick and easy
clean up. Keep the line parallel to and
above the surfaces being swept and
move the tool from side to side=
Sweeping
CUSTOMER RESPONSIBILITIES
CARE & MAINTENANCE TASK
Check for Loose fasteners and parts
Check for damaged or worn parts
Clean unit and labels
WHEN TO PERFORM
Before each use
Before each use
After each use
GENERAL RECOMMEN DATIONS
The warranty on this unit does not cov-
er items that have been subjected to
operator abuse or negligence. To re-
ceive full value from the warranty, the
operator must maintain unit as instruct-
ed in this manual. Various adjustments
will need to be made periodically to
properly maintain your unit.
CHECK FOR LOOSE
FASTENERS AND PARTS
• Housing Screws
• Assist Handle Screws
• Debris Shield
• Edge Guide
CHECK FOR DAMAGED OR
WORN PARTS
Refer replacement of damaged/worn
parts to your Sears Service Center.
• Trigger Switch - Ensure switch func-
tions properly by pressing and re-
leasing the trigger switch. Make sure
motor stops.
• Debris Shield - Discontinue use of
unit if debris shield is damaged.
CLEAN UNIT & LABELS
• Clean the unit using a damp cloth
with a mild detergent.
• Wipe off unit with a clean dry cloth.
REPLACING THE LINE
• Remove tile spool by firmly pulling
on the tap button.
• Clean entire surface of hub and
spool.
• Replace with a pre-wound spool
(# 71-85837), or cut a length of 30
feet of .065" (1.6 ram) diameter
Craftsman <_>Pro Trimmer line. Use of
heavier lines could overload the unit
and damage unit. Never use wire,
rope, string, etc., which can break off
and become a dangerous missile.
Loading ...
Loading ...