Loading ...
Loading ...
3
Product Assembly - Connect-22 Cable Routing per Machine
STEP 5: How to install Cable Clip Mounts
a. Clean surface with mild spray soap or a window
cleaner and dry with a 100% cotton rag.
b. Take adhesive strip off back of Cable Clip Mount.
c. Place Cable Clip Mount and hold for 15 seconds.
d. Install Cable under clip while gently holding the back.
NOTE: DO NOT over stretch clip mount opening. Only open
enough to gently slide the cable under the mount.
STEP 6: Install Cable Clip Mounts
a. Install a Cable Clip Mount at each arrow location on the
top left side of shroud in case of any service issues.
b. Then fully install the cable with the 2.5mm power cord end
at the Connect-22 back plug. Follow the Cable Clip
Mounts with the cable to the base of the Rower.
NOTE: If you have downloaded this document, zoom-in to see the light blue arrows and their locations.
Power Supply w/ cable to base
of handlebar, (Connect-22-005), 1 each
Power Cord to Power Supply,
(Connect-22-006), 1 each
CAUTION: It is highly suggested to follow the steps below to secure the cable
away from moving parts. Do not let the cable dangle straight down to the floor.
Power Tele-Cable from base
of handlebar to Connect-22,
(Connect-22-007), 1 each
Parts from the Connect 22 (items below are not to scale)
Connect-22 22" Screen Unit
(Connect-22-001), 1 each
Loading ...