Loading ...
Loading ...
Loading ...
SANTOS : Instruction and maintenance manual
98102 EN 5.8 - 01 2022 9 / 16 www.santos.fr
MAINTENANCE
Before carrying out any work on the appliance, it must in all cases be unplugged from the
mains power supply and the motor start capacitor discharged:
Discharging the capacitor:
Use a screwdriver with insulated handle to touch the 2 connectors on the capacitor
(12). The appearance of an electric arc shows that the capacitor has discharged.
Spare parts:
IMPORTANT: Use of spare parts other than certified original SANTOS parts is prohibited
This machine requires no specific maintenance. The bearings are lubricated for life.
If work is required to replace worn parts such as start relay or the electric or other
components, refer to the parts list (see exploded view at the end of the manual or which
you can download from our website www.santos.fr).
For all spare part orders (see references in the exploded view at the end
of the manual), state:
➢ the type,
➢ the machine serial number and
➢ the electrical specifications recorded under the machine.
The complete disc (6) can be considered to be a part subject to wear.
For the machine to operate properly, it is recommended that a check is also made that
the seal (13) is in good condition, in particular the absence of any signs of tearing of the
lip.
CLEANING
The appliance should neither be cleaned in a jet of water nor with a
high pressure spray.
1. Put the appliance on stop position by pushing the On/Off button and disconnect the
plug.
2. Remove the chute + lever assembly and the grating disk.
3. Wash the chute + lever assembly, the grating disc and the drawer with washing-up
detergent, rinse, dry and reassemble the unit.
4. The frame is to be sponged clean then dried. Polish from time to time with a non-
abrasive product for windows or a cleaning agent for metal.
!
!
Loading ...
Loading ...
Loading ...