Loading ...
Loading ...
Loading ...
m
Door Removal and Reversal Instructions (continued)
NOTE: Some moae_s nave "pocket" handles, which are recessed into the sides o" the door. On these models, on*y
me nlnges Will neea to oe reversea.
TO REMOVE FREEZER HANDLE:
{Handles may be eas_erto reverse wnHe aoors are off.
1. Remove two screws attaching handle to bottom of freezer door.
2. Remove short trim piece oy sllalng trim stra grit UDand off of handle
aracket.
3. Remove screw attaching lop of nanaleto aoor.
4. Magnetic Nameplate Models: Gently pry magnetic nameplate frame from
door. Remove nameplate from its frame, turn frame uos_ae aown ana
install in old handle holes. Insert magnetic nameplate into frame.
Self-Adhesive Nameplate Models: Gent y peel off nameplate from door
ana reapply over old handle holes.
TO ATTACH FREEZER HANDLE:
1. Reinstall handle on OPPOSites_ae. UsHlgsame hole as nameoIate.
2. Attach handle to bottom of door
3. Slide trim D_eoes[ra_gn[ aown onto nana_e oracKe[.
Trim_
Nameplate
Self Adhesive
Nameplate
Scr_ (some models)
Nameplate Nameplate J
over
Screw_=i D_tad Button
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer door.
2. Swing bottom of handle away from the door and slide handle straight up
and off of dovetail button.
3. Remove screw and dovetail button and install on other side, using the
same holes as nameplate.
4. Magnetic Nameplate Models: Use putty knife to gently pry magnetic
nameplate frame from door. Remove nameplate from its frame, turn frame
upside down and install in old handle holes. Insert magnetic nameplate
into frame.
Self-Adhesive Nameplate Models: Use putty knife to gently peel off name
plate from door and reapply over old handle holes.
TO ATTACH FREEZER HANDLE:
f. Start with handle offset away from door. Place top of handle over dovetail
button, swing handle into an upright position and pull downward, locking it
into place.
2. Secure bottom of handle with two screws removed earlier.
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
f. Remove two screws attaching handle to bottom of freezer door.
2. Remove button plug using edge of putty knife.
3. Remove screw on side of freezer door and remove handle.
TO ATTACH FREEZER HANDLE:
f. Secure side of handle to door and replace button plug.
2. Secure handle to bottom of door.
NOTE: To iem0ve freezer handlel refer to figure 3 Onpage 9.
Button
P!ug
Loading ...
Loading ...
Loading ...