Loading ...
Loading ...
Loading ...
Most laundering problems are easily solved if you understand the cause.
Using the charts below will save you time and money by helping you avoid
unnecessary service calls.
Problem
Not Drying
Satisfactorily
Solution
Clean Iint screen.
Run dryer for 5-10 minutes. Hold
hand under outside exhaust hood to
check air movement. If you do not feel
air moving, clean exhaust system of
lint or replace exhaust vent with heavy
metal or flexible metal vent (see
"Installation Instructions," Section D).
Exhaust vent is crushed Replace with heavy metal or
or kinked, flexible metal vent (see "Installation
Instructions," Section D).
One fuse is blown or circuit Replace fuse or reset breaker.
breaker is tripped. The dryer
will appear to operate, but you
will not get any heat.
Timer or the temperature Select the right cycle for the types
control is set on AIR DRY of garments being dried (see
or AIR FLUFR "Operating Your Dryer").
Load not contacting the Level dryer (see "Installation
sensor strips and automatic Instructions," Section B).
cycle ending early.
Fabric softener sheets Use only one softener sheet per load
biocking outiet griil, and only use it once.
Dryer located in room with Move dryer where it can operate in
temperature below 45°R ambient air temperatures above 45°R
Large amount of moisture Expect longer dry times with items
in the load. that hold more moisture (cottons).
Cold rinse water used. Expect longer dry times, but you are
saving energy and reducing wrinkles.
Load too large and bulky to Separate load to tumble freely.
dry quickly.
Dryer Will Power cord not firmly plugged Plug power cord into a live circuit.
Not Run into a Iive circuit with proper
voltage.
Fuses blown or circuit Replace fuses or reset breakers.
breakers tripped.
Possible Cause
Lint screen is clogged with lint.
Restricted air movement.
Exhaust vent or outside
exhaust hood is clogged with lint.
43
Loading ...
Loading ...
Loading ...