Loading ...
Loading ...
Loading ...
Troubleshooting en
41
Fault Cause and troubleshooting
"E:30 / -80"
▶
Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap
must be in a vertical position.
→"Cleaning the drain pump", Page38
"E:36 / -25 / -26" Drain pump is blocked.
▶
→"Cleaning the drain pump", Page37
The water pressure is low.
No remedial action possible.
The filter in the water inflow is blocked.
▶
Clean the water inflow filter.
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is kinked or jammed.
▶
Ensure that the water inlet hose is not kinked or
jammed.
"E:35 / -10" There is water in the base trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
→"Customer Service", Page49
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→"Customer Service", Page49
Detergent dosage is too high.
▶
Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mix-
ture into the left-hand compartment (not for outdoor
clothing, sportswear or items stuffed with down).
▶
Reduce the amount of detergent for the next wash-
ing cycle with the same load.
lights up. The temperature is too high.
▶
Wait until the temperature has dropped.
▶
→"Cancelling the programme", Page34
Water level is too high.
▶
Select a suitable programme for draining.
→"Programmes", Page28
Laundry is caught in the door.
1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
Loading ...
Loading ...
Loading ...