Loading ...
Loading ...
Loading ...
9
By ensuring proper cleaning and maintenance of your Residentia
rangehood, you can ensure that it will have a long and fault free operation.
Cleaning the grease fi lters Keeping this fi lter clean will keep the rangehood extraction performance at
an optimum. Please strictly follow the guidelines below.
– The grease fi lter mesh is made of high-density stainless steel. Please
ensure you never use a corrosive detergent during cleaning.
– Method 1: Put the mesh into 40-50°C clean water with a small amount of
regular dishwashing liquid, and soak for 2-3 mins. Wear gloves and clean
with a soft brush. Please do not apply too much pressure, as the mesh is
delicate and will damage easy.
– Method 2: You can wash your rangehood grease fi lters in your
dishwasher, however please ensure they aren’t washed at a temperature
above 60° C degrees.
Cleaning the cooker hood To protect the main body of your rangehood from corrosion or stains, the
cooker hood should be cleaned with hot water with a non-corrosive detergent
every two months. For stubborn stains or marks, you can try using a specifi c
stainless steel cleaner available from most supermarkets.
Warning! Please do not use a corrosive detergent, or abrasive
clothes, as it will damage the body.
– Keep the motor and other spare parts free from water, as this will cause
damage to the appliance.
– Before cleaning the rangehood, always switch the power off at the outlet
and unplug the rangehood.
– If your rangehood has a damaged plug or cord, please ensure your
rangehood remains unplugged and contact the Residentia Support team
for further assistance. Any electrical work should only be completed by a
suitably licenced and authorised person.
– If you’re using a carbon fi lter, it should never be exposed to heat.
Changing a light globe
In the event of
a broken globe:
–
Disconnect the rangehood from the power supply.
–
Remove the grease filter and remove the 2 screws on the fascia
panel.
Unplug the connec
ter on the lamp and push out the lamp from inside.
–
Replace the broken lamp and connect the lamp with cable again.
Re-fit the fascia panel with the 2 screws & grease filter.(previously removed).
Optional carbon fi lter (optional) An optional carbon fi lter can be purchased separately and installed in your
undermount rangehood. Normally the activated carbon fi lter should be
changed every three to six months according to your volume of cooking.
Activated carbon fi lter cannot be washed or recycled. The installation
procedure of activated carbon fi lter is as below.
– Remove the grease fi lters.
– Insert the fi rst activated carbon fi lter into the unit and turn it in anti-
clockwise direction. Then repeat the same on the other side.
– Re-insert the grease fi lters.
Note: When the activated carbon fi lter installed, the suction
power will be lowered.
– Insert the fi rst activated carbon fi lter into the unit and turn it in anti-
– Re-insert the grease fi lters.
CLEANING & MAINTENANCE
–
–
Loading ...
Loading ...
Loading ...