Esatto EUM52 User Manual

Loading ...

Through your wall Further to your various ducting options, below are some tips on how to

correctly duct your rangehood:

– Always use correctly sized ducting–DO NOT reduce the size of the ducting

– Always use solid ducting

– Always use non-flammable ducting

– Always duct to the outside atmosphere

– Do not use flexible ducting

– Do not duct into the ceiling space—always vent to the outside atmosphere.

– Avoid sharp 90 degree bends as much as possible, use 45 degree bends

instead wherever possible

– Duct to the outside atmosphere using the shortest duct run possible

– Use cylindrical ducting whenever possible

Positioning the rangehood Installation heights

–

Over gas and electric cookers, Esatto recommends our

rangehoods to be mounted at a height of between

600-800mm above the cooking surface.

– Electric cooktops must have a minimum height of 600mm from the

underside of the rangehood to the cooktop face.

– Gas cooktops must have a minimum of 650mm from the burner to the

underside of the rangedhood.

– Over open flame grillers or barbecues, the Gas Regulations require the

ﬁ lters of the rangehood to be at least 1200mm above the cooking surface.

Installing the rangehood – The typical installation method for your undermount rangehood is into a

purpose built overhead/wall cabinet.

– Using a jigsaw, create the required cut-out for your undermount

rangehood, as per the following:

–

EUM52 52cm: 490 × 250mm

–

EUM75 75cm: 715 × 250mm

–

EUM90 90cm: 865 × 250mm

– Make sure the cut-out is at least 35mm from the cabinet edge.

–

Remove the grease fi lter and remove the 2 screws on the panel.

– Screw the rangehood into the cabinet using 8 screws (supplied).

–

Re-fi t the panel with the 2 screws (previously removed).

INSTALLATION INSTRUCTIONS

CONTINUED

Loading ...

Esatto EUM52 52cm Under Cupboard Rangehood