Loading ...
Loading ...
Loading ...
Tighten adiust nut
B to raise mower
B tO OWO_ maw®r
loosen am nut A flint
NOTE: Each full turn of the adjustment
nut wi_ change mower heght abeut 1/8'
o Rec eck measurements adjust if neck.
essary unti front t}p of blade is 1/8" to
I/2 lower than the rear tp
o Ho!d adiustment nut n pos tion wth
wrench and t ghten am nut secure y
against adjustment nut,
TO REPLACE MOWER DRIVE BEL,'T
MOWER DRVE BELT REMOVAL
1 Park t_actor on a level s _rface Engage
park ng brake,
2 Lower attachment lift lever to its fewest
3 Disengage belt tension red (K) frem
bck bracket (L}
CAUTIONs Bet tension rod s aping
loaded 4ave a lrm grp on rod and re
4, Remove screws (P) from R.H and LH
mandrel covers and remove covers
5, Remove any dirt or grass c ipp ngs
which may have accumulated around
mandrels and entre upper deck sur_
6, Remove bet from electric clutch pufiey
(M), both mandrei pu_leys (R) and aI_
idbr pu_ eys (S),
MG_.&_ERDRIVE BEET iNSq_LLAT!ON
1. Instalt beit around both mandre puF
eys (R} and around idler pul eys (S} as
2_ Install be_t onto efectrc clutch puiey
ff_PORTANT: Check bet for poper rout_,
ing inall mower pulley grooves
3 Reassemble RH, a_d LH mandrel
covers (Q) Securey tghten a screws,
4 Engage belt tenson rod (K) on locking
CAUTIONs Bet tens on rod is sprng
baded_ Have a tght grip on rod and en _,,
gage slew y,
5 Raise attachment ift bver to higt_est
Loading ...
Loading ...
Loading ...