Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
SERVICERECORDS
Fillin dates asyou
completeregular
service.
Before Every Every Every
Each 5 10 25 Each Before SERVICE
Use Often Hours Hours Hours Seat,on Storage DATES
-nghten All Screws and
Nuts
Check Spark Plug
Lubricate Chute Control
Flange
Drain Fuel
Check Fuel _J
Check Auger Drive
Cable Adjustment
(See Cable Adjustment) .j
.j
GENER,AL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
All adjustments in the Service and Ad-
justments section of this manual
should be checked at least once each
season,
AFTER EACH USE
• Check for any loose or damaged
parts.
• Tighten any loose fasteners.
• Check and maintain the auger.
• Check controls to make sure they
are functioning properly.
• If any parts are worn or damaged,
replace immediately.
• Run the machine to clear the auger
of snow.
• To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
LUBRICATION
Before Storage
1. Remove the top cover. See "How
To Remove The Top Cover".
2. Lubricate the chute control flange.
Apply a clinging type of grease such
as Lubriplate.
Chute Control
Flange
Figure 5
F-001128M 14
Loading ...
Loading ...
Loading ...