Loading ...
Loading ...
Loading ...
- 23 -
You can also login in the IE Web interface of the NVR to add the camera manually. ( See
Figure 3-18 )
Figure 3-18
<NVR Web Adding Interface>
3.3.2 Camera connect to Hikvison NVR via Router or POE Switch (NVR havn’t POE Ports)
Note: 1.Make sure the NVR and cameras ’IP address have valid IP scheme that matchs each other
2.Enable the “ONVIF” of the camera and NVR in Web interface
Step 1:Modify the IP address of camera and NVR to make sure the NVR , cameras and the POE
switch router have valid IP scheme that matchs each other.( e.g.: POE switch router’s IP is
192.168.1.1, so the camera and NVR’s IP must be 192.168.1.XX) . (See Figure 3-19 - Figure 3-20)
Step2: Add camera to NVR manually with ONVIF
Access NVR’s UI page > Select “camera” > Select the camera’s connecting channel
number>Click the add button > Select “Manual” for the adding method > Select “ONVIF” > Enter
the camera’s IP address,user name and password > Select “OK”,refresh few seconds,video is
showing,adding camera successfully. (See Figure 3-21 - Figure 3-23)
< Config TooL for modifying Camera’s IP >
Figure 3-19
Loading ...
Loading ...
Loading ...