Loading ...
Loading ...
Loading ...
- 16 -
Figure 3-5
3.2.2 Dahua NVR (WITHOUT POE) Configuration, adding camera manually
Steps1: Connect cameras to POE switch or router ‘s Ports ,and then connect monitor and NVR
via VGA or HDMI ports, power for those devices .Confirm the the LAN is available, and make sure
the NVR , cameras and the POE switch router have valid IP scheme that matchs each other.( e.g.:
POE switch router router’s IP is 192.168.1.1, so the camera and NVR’s IP must be 192.168.1.XX ).
(See Figure 3-6)
Step2: Access NVR’s UI page > Select“Main Menu” > “SETTING”>“Camera” > “REGISTRATION”
(See Figure 3-7)
Step3: Select “Manual add” > Enter camera’s IP address and password > Click “OK” > Refresh
few seconds, video is showing, adding camera successfully. (See Figure3-8 - Figure3-10 )
Loading ...
Loading ...
Loading ...