Loading ...
Loading ...
Loading ...
11
Air Shutter
Orifice
1-1/2”
(3.8 cm)
Spark Ignitor Adjustment
Occasionally a burner may not ignite within a few seconds after
turning the appropriate control knob counter-clockwise. To adjust
the spark ignitor, use a small needle nose plier to turn the metal
head of the ignitor towards the port (opening) on the burner. DO
NOT TURN THE IGNITOR BY THE CERAMIC BASE. This could
cause damage to the spark ignitor.
Metal head
on ignitor
Ports (openings)
on burner
Ceramic Base
Fig. 3
SIDE BURNER
(If applicable)
Distance between
ignitor and burner
port - 1/8” (0.32 cm)
3/8”
(0.95 cm)
Loading ...