Loading ...
Loading ...
Loading ...
166 STARTING AND OPERATING
(Continued)
The system may not be able to detect pedestrians or
animals in the following situations:
Pedestrian/animal is outside of the detection range
Pedestrian/animal is fully or partially covered
Pedestrian/animal does not reach the minimum detec-
tion height
NOTE:
Other objects on the road that meet the height/shape/
temperature (e.g. sun exposure) of pedestrians/animals
may be detected and classified as targets.
SERVICE THE NIGHT VISION SYSTEM
When service conditions are present, the following fault
messages may appear in the instrument cluster display
when the vehicle is placed in the ON position.
If "Night Vision Unavailable Sensor Blocked" appears in
the instrument cluster display, make sure the camera is
clear of snow, ice, mud, dirt or other debris. The camera is
located in the upper fascia/bumper, inside the driver side
grille slot. Clean the camera using a soft wet cloth or by
pressing the Clean Camera button in the Uconnect
system. If the message continues to appear after cycling
the ignition, see an authorized dealer.
If “Night Vision Temporarily Unavailable” or “Night Vision
Unavailable Service Required" appears in the instrument
cluster display after cycling the ignition, see an authorized
dealer.
The camera must be properly aligned to work correctly. If
the camera needs adjustment, see an authorized dealer.
Do not attempt to adjust the camera yourself.
NOTE:
Alignment and performance of the Night Vision may be
affected by aftermarket modifications. Mopar® parts
should be used to get the optimal performance of this
system.
NIGHT VISION SYSTEM LIMITATIONS
The Night Vision display is deactivated under the following
conditions:
Vehicle is shifted into REVERSE
The ignition is not in the ON/RUN position
The headlights are off and the vehicle speed is greater
than 8 mph (13 km/h)
The Night Vision display warnings are suppressed under
the following conditions:
Daylight hours
Temperatures above 86°F (30°C)
The system may not be fully functional in the following
situations:
On steep hills
On tight curves of the road
If the camera/sensor is damaged or blocked by dirt,
snow, ice, or other debris
In poor visibility conditions such as heavy fog, rain,
snow, or other weather conditions
If the vehicle has been modified with aftermarket parts
and/or accessories
NOTE:
If any of these conditions are present, the system does not
need service.
WARNING!
Night Vision can only detect pedestrians/animals
located within the range of the infrared camera.
Night Vision will not detect pedestrians/animals in
brightly lit conditions.
Night Vision may not detect pedestrians/animals
and highlight them if:
The pedestrians/animals are not in an upright
position, for example if they are sitting or lying
down, or if the pedestrian is riding a bicycle.
The pedestrian/animal in the display appears
incomplete, for example because the pedes-
trian/animal is partially behind a vehicle.
The pedestrian/animal is not directly ahead in
the coverage area.
The pedestrian/animal is part of a group.
The pedestrian is wearing certain types of
clothing.
The pedestrian/animal is moving too quickly
through the field of view.
The sensor is blocked by dirt, rain, snow, or ice.
WARNING!
22_WS_OM_EN_USC_t.book Page 166
Loading ...
Loading ...
Loading ...