Loading ...
Loading ...
Loading ...
13
English
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTIONPROBLEM
Unit is not plugged in. Plug power cord into electrical outlet. Ensure a tight t between plug and outlet.
SEE IMPORTANT INSTRUCTIONS.
Household circuit breaker has tripped or blown fuse. Reset circuit breaker or replace fuse. See
IMPORTANT INSTRUCTIONS.
Ground fault circuit interrupter (GFCI) has tripped. Ground fault circuit interrupters are not recommended
for use and may cause nuisance tripping. If tripping does occur, relocate the unit to a standard wall outlet.
The unit has overheated. Automatic Safety Shut-Off has initiated. See RESET HEATER.
This unit features an internal tip-switch that activates and will shut the unit off if the unit tips over. Ensure unit
is on a at, horizontal surface.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Ensure unit is set to High Heat and thermostat is set to highest temperature setting.
Switch unit to continuous heat mode.
Close all doors and windows to trap heat.
Allow the unit to fully circulate the heat throughout the room; may take several minutes.
The Unit fails to power on.
The Unit is not producing a
sufcient amount of heat.
Loading ...
Loading ...