Loading ...
Loading ...
Loading ...
12. TROUBLESHOOTING
12.1 TROUBLESHOOTING GUIDE
Problems
• Tool will not operate. Air
flows slightly from
exhaust. Spindle turns
freely.
• Tool runs slowly. Air flows
freely from exhaust.
• Rotor vane seized. • Pour air tool lubricating oil
into air inlet.
• Operate tool in short
bursts.
• Tap motor housing gently
with plastic mallet.
• If still not functional,
return to service centre.
• Motor or throttle seized
with dirt.
• Check for dirt in air inlet.
• Pour air tool lubricating oil
into air inlet.
• Operate trigger in short
bursts.
• Disconnect air line supply,
then turn spindle by hand.
Reconnect air supply.
• If motor fails to turn return
to service centre.
Possible cause Required action
• Spindle seized. • Motor vane broken. • Return to service centre.
• Tool will not shut off. • ‘O’ rings throttle valve
dislodged from seat inlet
valve.
• Replace ‘O’ ring or return
to service centre.
We recommend the
use of Draper Air
Tool Oil:
500ml Stock No.34681
1Litre Stock No.34682
250ml Stock No.34679
- 16 -
Loading ...
Loading ...
Loading ...