Loading ...
Loading ...
Loading ...
1. Wall Control !ocation.
. Wall Control location should be in direct sight
of door.
. It should be at least five feet (5') above floor to
prevent small children from operating door.
. It must be away from any moving parts. (You
should NOT be able to reach the garage door
while standing at Wall Control.)
. Wall Control board screw connections are
polarized, (+) positive and (-) negative.
2a. Wiring (if pre-wired).
. Locate Wall Control pre-wired wire ends
(Fig. 3-1). (They should be located within the
guidelines mentioned above.)
. Split and strip ends of wire (Fig. 3-2).
. Fasten wire to Wall Control board screws on
back of Wall Control.
-Striped wire to the + (plus) terminal.
-White wire to the - (minus) terminal.
2b. Wiring (if NOT pre-wired).
. Pick a convenient location for mounting
Wall Control using the guidelines mentioned
above (Fig. 3-1).
. Run wire from power head to Wall Control
(Fig. 3-1).
. Split and strip ends of wire (Fig. 3-2).
. Fasten wire to Wall Control board screws on
back of Wall Control.
-Striped wire to the + (plus) terminal.
-White wire to the - (minus) terminal.
ยข)
Separate
entry door
j_
Wire from
power head
...... to Wall Control
............::::.
Wall
Control
"Entrapment"
warning label
EXAMPLE ONLY!
I This is an example of wire routing
__---I when NOT pre-wired. Your wire
- Jrouting may be different.
Loading ...
Loading ...
Loading ...