Loading ...
Loading ...
Loading ...
32
2
Press jog stick “ENTER” to switch to the “Multi Zone Control” screen.
3
Select “Power Amp Assignment” then press jog stick “ENTER”.
4
Select “Surround Back” to use as the surround back
channel, “Zone-2” to use as multi-zone 2, then press
jog stick “ENTER”.
When “Surround Back” is selected When “M-Zone2” is selected
Setting the Auto Surround Mode
The surround mode last used for the four types of input signals shown below is stored in the memory and the signal is automatically played with
that surround mode the next time it is input.
Note that the surround mode setting is also stored separately for the different input sources.
q Analog and PCM 2-channel signals
w 2-channel signals of Dolby Digital, DTS or other multichannel format
e Multichannel signals of Dolby Digital, DTS or other multichannel format
r Multi-channel signal when conducting playback using the EXT.IN-1, EXT.IN-2 and DENON LINK terminals
During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.
1
Select “Auto Surround Mode” on the System
Setup Menu screen, then press jog stick “ENTER”.
2
Select “ON” if you want to use the auto surround mode, “OFF” if you do
not want to use it.
3
Enter the setting.
The System Setup Menu reappears.
Loading ...
Loading ...
Loading ...