Loading ...
IMPORTANT SAFETY
INSTRUCTIONS
Iftheinformationinthismanualisnotfollowed
exactly, afire orelectricalshockmay result causingproperty
damage, personalinjuryor death.
• ALL RANGES
CAN TIP
• INJURYTO PERSONS
COULD RESULT
• INSTALL ANTI-TIP
DEVICE PACKED WITH
RANGE
• SEE INSTALLATION
INSTRUCTIONS
Important Notes to the Installer
1, Read all instructions contained in these installation
instructions before installing range.
2. Remove all packing material from the oven compartments
before connecting the gas and electrical supply to the
range,
3. Observe all governing codes and ordinances.
4. Be sure to leave these instructions with the consumer.
Important Note to the Consumer
Keep these instructionswithyourowner's guide for future
reference.
As whenusinganyappliancegeneratingheat, there are
certainsafetyprecautionsyou shouldfollow.These are
listedinthe Use& Care Manual. read itcarefully.
Besureyourrangeisinstalledandgroundedproperlyby
a qualified installer orservice technician.
Make sure the wall coverings around the range can
withstand the heat generated by the range.
Toeliminate the needto reach overthe surface elements,
cabinet storage space above the elements should be
avoided.
Before Starting
Tools You Will Need
For leveling legs and Anti-Tip Bracket:
Adjustablewrenchor channel lockpliers
5/16" Nutdriveror Flat Head Screwdriver
Electric Drill & 1/8" Diameter Drill Bit (Masonry Drill Bit if
installing in concrete)
For electrical supply connection:
1/4" & 3/8" Socket driver or Nutdriver _1]====_
Additional Materials You Wig Need
Power Supply Cord or
Copper Electrical Widng&Metal Conduit (for hardwiring)
Normal Installation Steps
1. Anti-Tip Bracket Installation Instructions
Important Safety Warning
To reduce the risk of tipping of the range, the range mustbe
secured to the floor by properly installed anti-tip bracket and
screws packed with the range. Failure to install the anti-tip
bracket will allow the range to tip over if excessive weight is
placed on an open door or if a child climbs upon it. Serious
injury might result from spilled hot liquids or from the range
itself.
If range is ever moved to a different location, the anti-tip
brackets must also be moved and installed with the range.
Instructions are provided for installationinwood or cement
fastened to either the floor or wall. When installed tothe wall,
make sure that screws completely penetrate dry wall and are
secured inwood ormetal. When fastening tothe floor orwall,
be sure that screws do not penetrate electrical wiring or
plumbing.
A. Locatethe Bracket Using the Template- (Bracketmay
belocatedoneithertheleftorrightsideoftherange. Use
the informationbelowto locatethe bracketiftemplateis
notavailable). Mark the flooror wallwhere leftor right
sideoftherangewillbelocated. Ifrearofrangeisagainst
thewallornofurtherthan 1-1/4"from wallwhen installed,
you may usethe wall orfloor mount method. If molding
is installedand does not allow the bracket to fit flush
againstthewall,removemoldingormountbrackettothe
floor. Forwall mount,locate the bracketby placingthe
backedge ofthetemplate againstthe rear wall andthe
sideedge oftemplate onthemarkmadereferencingthe
sideofthe range. Place bracket ontop oftemplate and
marklocationofthe screwholesin wall. Ifraar ofrange
isfurther than 1-1/4"from thewallwhen installed,attach
brackettothe floor. Forfloor mount, Iocatethe bracket
byplacingbackedge ofthe template where the rear of
the rangewillbe located. Markthe locationofthescrew
holes, shown in template.
2
Loading ...
Loading ...
Loading ...