Loading ...
Loading ...
Loading ...
Operatin
instructions
Status window
That STATUS window displays codes typically seen
during normal operation or programming of the
dishwasher. The STATUS window indicates the
following activity:
LOW RINSE CLEANi
C! CI _._uMI. I
CLOSE DOOR J
I
11HR-24HR - Indicates
number of delay start
hours for selected
cycle.
CLOSE DOOR -
Flashes once the
program has been
entered and the START
pad is pressed. It also
flashes if the door is
opened during a wash
cycle. Close the door
to begin or continue the
wash cycle.
I
I
m Child Lock is
activated.
MIN - The cycle duration
or the remaining time.
L1 - L4 - Level of Rinse
Aid Dosage.
LOW RINSE - Refill
Rinse Aid
CLEAN - End of Cycle.
Display on floor
The display on floor indicates the following
activities:
I I The cycle duration remaining
_=55 time,
I DELAY I Remaining time of Delay
2:59 start
C I
I Cr_O ] Endofcy cle
L cLEA.)
I I ID ] Error codes
Error Codes
Displayed
Error Code*
i10
i20;
i40;
iFO
i30
i50
i60
Problem
A low fill has been detected.
Clogged filters or a restricted
drain line has been detected.
A leak or overflow of water
has been detected in the
bottom pan.
A problem has been
detected with the drain or
wash motor.
A problem has been
detected with the water
heating system.
A problem has been
iC0 detected with the electronic
control system.
Solution
Look for a pinched water supply line, or water shutoff is
not completely opened.
Check and clean both filters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug
has been removed.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and
the unit can be restarted.
If this does not resolve the problem, service
will need to be called.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min.
does not resolve the problem, contact the Electrolux Customer Care Center at 1-877-435-3287.
Loading ...
Loading ...
Loading ...