Loading ...
Loading ...
Loading ...
Feature Overview
How your dishwasher cleans
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against
soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while loading,
then fills with water covering the filter area. Water is then pumped through the spray arms. Soil particles
go through and across the filter and down the drain as the water is pumped out. This series of steps are
repeated as needed. The number of water fills varies with the cycle being used.
Upper S / Arm
Cutlery Tray
Tub Gasket
Adjustable Rack
Mechanism
Cup Shelves
Upper Rack
Soft Grip Rack
Middle S
Arm
Stemware
Holder
Bottom Rack
Lower S
Arm
Deterg
Dispenser
Dispenser
Flex Wash
Interior Light
Silverware Basket
Filters
Serial Label
(located on right
side of door)
Getting Started
To run your dishwasher, follow these basic steps:
1. Load Dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Select desired CYCLE (See Cycle Chart).
5. Select desired OPTION (See Energy Options).
6. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
7. To start, press START pad and close door.
Loading ...
Loading ...
Loading ...