Loading ...
Loading ...
Loading ...
Replacing the light bulbs.
Setting either or both controls to 0 does not remove power to the light circuit.
_____ Refrigerator Compartment--Upper Light
Tabs
0
0
Unplug the refl'igerator.
The bulbs are located at the top ot the
compartment, inside the light shield.
On some models, a screw at the fl'ont of
the light shield will have to be removed.
@
To remoxe the light shield, press in on
the tabs on the sides of the shield and
slide fi)rward and ()tit.
O _Mter replacing the bulb with an
appliance bulb of the same or lower
wattage, replace the light shield and
scrm_:s (on some models). When
replacing the light shield, make sure
that the tabs at the back of the shield fit
into the slots at the back ot the light
shield housing.
Plug the reti_igerator back in.
Refrigerator Compartment--Lower Light
This h_?htis located above the top drawer
O Unplug the refrigerator
@ Remove the convertible meat drawer
control knob by pulling straight ()tit.
lift the light shield up and pull it out.
@ _Mter rei)lacing, the bulb with an
appliance bulb of the salne or lower
wattage, replace the shield and
the knob.
0 Plug the refrigerator back in.
Freezer Compartment
Unplug the refligeratoi:
Remove the shelf just above the light
shield. (The shelf will be easier to
remove if it is emptied fiist.) On some
models, a screw at the top of the light
shield will need to be removed.
O To remoxe the light shield, press in on
the sides, and lift up and ()tit.
Replace the bulb with an appliance
bulb of the same or lower wattage,
and reinstall the light shield. X*Vhen
reinstalling the light shield, make
sure the top tabs snap securelv
into place. P,eplace the screw (on
some models).
0 P,einstall the shelf and plug the
refl'igerator back in.
Dispenser
Unplug the refligerat(n:
The bulb is located on the
dispenser under the control panel.
Remoxe the light bulb by turning
it counterclockwise.
Replace the bulb with a bulb of the
SaIl/e size and watta ,e
O Plug the refrigerator back in.
16
Loading ...
Loading ...
Loading ...