Loading ...
Loading ...
Loading ...
www.BISSELL.com
13
WARNING
This product contains lithium-ion rechargeable batteries. According to
Federal and State regulations, removal and proper disposal of lithium-ion
batteries is required. For removal of batteries in your SpinWave® Cordless,
see instructions on this page.
Disposing the Batteries
NOTICE: Disconnecting the battery will destroy the appliance and invalidate the
warranty.
With a Phillips-head
screwdriver, remove
the 5 screws on the
back of the unit.
Insert a screwdriver
into the hole on the
back of the unit
below the Carry
Handle in order
to disconnect the
handle.
1
4
NOTE: Keep Battery Pack together – DO NOT separate individual batteries.
For specific disposal instructions of batteries, please contact the RBRC
(Rechargeable Battery Recycling Corporation) at 1-800-822-8837
or visit www.Call2Recycle.org.
3
2
Before proceeding, ensure that:
-The unit is disconnected from the charger.
-The Clean Water Tank has been removed from unit.
-You have flat-head and Phillips-head screwdrivers and rubber-handled wire cutters.
Remove the control panel with battery
pack. For leverage, you may need to use
the flat-head screwdriver to help remove.
Insert flat-head screwdriver between
the top front and back plates located
between the Carry Handle and main
handle to remove the front body plate.
5
6
Disconnect the
8 inputs that
are connected
to the control
panel. Then,
using a Phillips-
head screwdriver,
unscrew the two
screws on the
control board.
Pull the control panel back from the
battery pack. Then, with rubber-handled
wire cutters, clip the two metal poles to
disconnect the battery pack from the
control panel.
Loading ...
Loading ...
Loading ...