Loading ...
Loading ...
Loading ...
www.BISSELL.com
10
Cleaning Sealed Hard Floors
When fully charged, press the ON/OFF
button and the three LED lights will
illuminate.
Recline the body of the unit backward
to start the rotating mop pads.
1
TIP 3: For optimum cleaning, perform overlapping cleaning strokes while dispensing
cleaning solution. Care should be taken to not overwet the floor surface, especially
when cleaning wood and other delicate floor surfaces.
ATTENTION: This machine is designed to be used only on sealed hard floors and
should not be used on carpet or rugs. For best cleaning results, sweep or vacuum the
floor surface prior to using to avoid scratching or damaging floors from sharp debris.
TIP 1: You may feel a slight vibration when turning on the machine if the mop pads
are not aligned correctly. Wait a few seconds for the pads to adjust themselves. If this
doesn’t occur, turn the machine OFF and replace mop pads following the instructions
in “Attaching Mop Pads” sections.
TIP 4: When cleaning near baseboards, edges or furniture you may feel a slight pull
from the unit due to bouncing off the surface.
TIP 2: When you press the ON/OFF button to start the unit the LED lights will
illuminate, but the mop pads will not start rotating until the unit is reclined.
2
Loading ...
Loading ...
Loading ...