Loading ...
Loading ...
Loading ...
_@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @
To Change the Door Panel insert
(select models)
1. Using a Phillips screw driver, remove either the right or
left-hand door trim strips by removing the three screws.
2. Grasp the panel insert(s) and gently flex out slightly. Slide
Panel(s) out about two inches. Continue to flex insetl
panel(s) enot@l to remove them. Use care, edges may be
sharp.
3. Select color and reinstall panel(s). Place insert panel(s)
(notched corners at the top) on the inside of the lower
door panel trim. Make sure the upper notched comers
of the insert(s) are under the control panel.
4. Reinstall the side trim.
Convertib|e Dishwashers 0,@oo,o@oooo@oooo,oooo,o@oo, @oooo@ooo
Connecting a Convertible
N
N
N
N
N
N
N
N
Turn on the faucet at the sink until the water runs
hot. Turn off the faucet.
Pull the connector from the recess in the back of the
dishwasher.
Press down on the thumb release and lift the con-
nector onto the faucet.
Remove pressure from the thumb release and tug
sli_ltly on the colmector to be sure it is securely in place.
Turn the hot water on full force.
Check that the sink drain is open so water from the
dishwasher can drain properly.
Pull the electrical cord from the recess. Plug it into
a properly grounded outlet.
Select the proper cycle and options for the load and
start the dishwasher.
Care and Cleaning
Clean the cabinet and laminate top with a soft damp
cloth and liquid spray cleaner.
To polish and protect the laminate top, use a product
specifically developed for countertops such as Hope's
Countertop Polish*.
Apply an appliance wax to the cabinet once a year.
*Brand names are the trademarks of the respectix e manufacturer.
Disconnecting a Convertible
_Be sure to turn water supply press pres-
the of f and the
sure release button BEFORE removing the con-
nector.
_ Press down the thumb release and the
on remove
connector from the faucet.
_Push the and hoses back into the cabinet
connector
recess.
_ Unplug the electrical cord and it back into the
push
cabinet recess.
Release
Button
8
Loading ...
Loading ...
Loading ...