Loading ...
Loading ...
Loading ...
Before You Ca|| oo oooooo o ooo ooo oooooo ooo o ooo oooooo ooo o
Check these points to help save you time and money:
o®eO00OO000®e00oOOO00®oI0oOOO00_0eI0_OO_0_0e00oOO000®o00oOOO00®@QOoOOO00®®eO_oOO000®e0 •
Won't Fill * Be sure door is latched securely.
• Be sure the water is turned on.
• Check that the dial/pad is properly selected for a cycle.
• Allow time for select models to drain/pause before filling.
• Check your home's circuit breaker or fuse box.
• Check inlet hose for a kink.
• Check water valve inlet for sediment and clean if necessary.
Won't Drain/Water * If connected to a food waste disposer, be sure the knock-out is removed from the dis-
in Tub Bottom poser inlet.
• Be sure the drain hose is elevated at least 32" so water cannot siphon back into the tub.
• Check for a food obstruction in the drain or disposer.
Check drain hose for a kink.
Check your home's circuit breaker or fi_se box.
Check that the cycle is completed.
Detergent Cup * Check that the cycle is completed.
Not Empty * Be sure dispenser is not blocked.
Use fresh detergent which has been stored in a cool, dry place.
Seems Noisy * A water valve hiss during fill is normal.
• Water circulation sounds are normal.
• A ticking noise is a normal timer sound.
• A thumping sound may be a wash arm bumping an item that is extending beyond the racks.
Chopping or grinding sounds may be heard during drain as the internal food disposer
chops hard items like fruit seeds, nuts, etc.
• Humming during drain is normal.
• A snap noise is the detergent cup lid hitting the door liner when the dishwasher door is
opened at the end of the cycle. This is normal.
Proper installation affects the noise level.
Cycle Takes Too Long-- * AccuTemp TM (select models), Sani Heat (select models), or Extended Wash (select
(Heating Delay light models) has been selected and the cycle is extended if the water temperature is low.
stays on) (See pg. 6)
Check to see that the incoming water temperature is 120-140 ° F (49-60 ° C).
Has An Odor * Run dishes being held in the dishwasher through a Rinse Only cycle.
• Many dishwashers have a "new" snrell when first installed. This will dissipate with use.
• A chemical odor is usually the chlorine bleach in dishwasher detergents. Try another brand.
• Dishwasher may not be draining properly. (See "Won't Drain" section.)
For a strong odor try placing baking soda in both sides of the detergent cup. Select
Light Wash and allow the water to circulate for about 10 minutes. Interrupt the cycle
by unlatching the door and let it stand overnight. Restart the dishwasher by latching the
door and allow it to complete the cycle. Another alternative is to use a commercial dish-
washer cleaning product such as Jet-Dry Dishwasher Cleaner*.
Leaks * Check that the dishwasher is level. (Refer to the Installation Instructions.)
Suds can cause the dishwasher to overflow. Measure the detergent carefully and use
only detergents designed for use in a dishwasher. Less detergent is needed in soft water.
Try another brand if sudsing continues.
• Follow directions closely on how to add a forgotten item (pg. 5).
• Be sure the Rinse Aid lid is securely attached and product is not leaking.
9
Loading ...
Loading ...
Loading ...