Loading ...
Loading ...
Loading ...
7
ASSEMBLY INSTRUCTIONS
Motor Screw
Blade Arm
9. Install the blade arm to the underside of the motor
assembly with motor screws previously removed (Step 3,
page 5). Tighten with Phillips screwdriver (not included).
Repeat for each blade arm.
Note: The notch in the tter plate allows a Phillips
screwdriver (not included) access to motor screws.
9
Bulb
Fitter Plate
Notch
Light Kit
Light Kit
9-pin
Connector
Fitter Plate
Screw
Reverse Switch
10
11
12
11. Remove the preassembled nial and light cage from
the threaded rod at the bottom of the light kit and save.
12. Install the E26-base LED bulbs into the sockets of the
light kit.
Important: Make sure you allow the bulbs and light kit to
cool before you replace the bulbs.
10. Remove the three tter plate screws preassembled to
the tter plate. Then, connect the 9-pin connector from
fan to the 9-pin connector from the light kit. Secure the
light kit with the tter plate screws.
Light Kit
Light Cage
Finial
Threaded Rod
Loading ...
Loading ...
Loading ...