Loading ...
Loading ...
Loading ...
5
ASSEMBLY INSTRUCTIONS
3
4
2
1
1. Turn OFF the electrical power at the main fuse or circuit.
DANGER: Failure to disconnect the power supply prior to
installation may result in serious injury or death.
2. Secure the upper mounting bracket to the outlet box
using screws, spring washers, provided with the outlet box
(not included).
WARNING: To reduce the risk of re, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting screws
and washers provided with the outlet box.
4. Place one tab of the lower bracket into a large slot in
the upper mounting bracket. Then slide the second tab
of the lower mounting bracket into the second large slot
on the upper mounting bracket until all four holes are in
alignment.
3. Remove the four mounting bracket screws from
underneath the lower mounting bracket. Then, remove
the ten motor screws and save for blade arm attachment.
Note: Remove the wire restraint from the wires on top of
the lower bracket.
Note: The notch in the tter plate allows a Phillips
screwdriver (not included) access to motor screws.
Motor
Notch
Motor Screw
Large Slot
Lower
Mounting
Bracket
Tab
Mounting
Bracket
Screw
Upper
Mounting
Bracket
Outlet Box
Upper Mounting Bracket
Loading ...
Loading ...
Loading ...