Loading ...
Loading ...
Loading ...
EN-10
EN
Electric Slicer & Grater
SSG 3500WH / SSG 3501GR / SSG 3502BL / SSG 3503OR / SSG 3504RD
SSG 3505VT / SSG 3506YL / SSG 3507TQ / SSG 3508RS
2015
01/2015
CLEANING AND MAINTENANCE
• Clean out the appliance after every use.
• Before cleaning it, make sure that the appliance is turned off and disconnected from the power
socket and that the rotating parts have stopped.
• Remove the used attachment and chamber A3 with the feed tube A2 from the motor unit.
• Wash the accessories (attachment, chamber A3 with feed tube A2, pusher A1 and the fastening
pin A4) with warm water and neutral kitchen detergent. Then rinse under clean running water
and wipe dry.
Attention:
The cutting blades on the slicing and grating attachments A9–qd are very sharp and so it is
necessary to be especially careful when handling them to prevent injury.
Note:
Certain types of food, such as carrot, may cause discolouration of plastic parts of the appliance.
If this occurs, dip a paper kitchen towel in a small amount of cooking oil and apply it on to the
discoloured part of the appliance as soon as possible. Then clean this part in the usual manner.
• To clean the motor unit A7, use a cloth dipped in a weak neutral detergent solution. Then wipe
everything with a clean dampened cloth and wipe dry.
• Never submerge the appliance or its power cord in water or any other liquids. For cleaning, do
not use thinners or solvents or cleaning agents that cause abrasion. Otherwise the surface of the
appliance may be damaged.
STORAGE
If you will not be using the appliance, store it in a dry place out of the reach of children.
Loading ...
Loading ...