Loading ...
Loading ...
Loading ...
MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or
above the maximum settings for the feature.
FEATURE MINIMUM TEMP, /TIME MAXIMUM TEMP, /TIME
QUICK PREHEAT 1700F/77°C 550OF/288°C .....
BAKE 170°F/77°C 550°F/288°C
BROIL 4000F/205°C 550°F/288°C :i
WARM 170°F/77°C 170°F/77°C/ 3 hours
PIZZA 400OF/2050C 425OF/218oC
TIMER 12 Hr. Mode 0:01 Min. 11:59 Hr./Min ....
24Hr. Mode 0:01 Min, 11:59 Hr.iMin:
CLOCK TIME 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min.
24Hr. Mode 0:00 Hr.lMin: 23:59 Hr./Min:
DELAY TIME 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min.
24 Hr. Mode 0:00 Hr.lMinl 23:59 Hr./Min'
BAKE TIME 12 Hr. Mode 0:01 Min. 11:59 Hr./Min.
24 Hr. Mode 0:01 Min: 11:59 Hr./Minl
i
2 hours 4 hours
IMPORTANT THINGS TO KNOW BEFORE
SETTING ANY OVEN COOKING FEATURE
Thisappliancehas been factorypre=setto startany
BAKE, WARM or QUICK PREHEAT featurewiththe
oven settemperatureautomaticallysetfor350°I:.The
BROIL featureispre=setat 550°I:.However ifdesired,
theoven settemperaturemay be adjustedat any
timeduringthe cookingprocess.You may alsochoose
to add a BAKE TIME or DELAY TIME withmost of
thefunctionslistedabove,unlessspecifiedintheir
correspondingsection.
SETTING THE CLOCK
The SET CLOCK pad isused to setthe clock.The clock
may be setfor12 or 24 hourtime of day operation.
The clockhas been presetat the factoryforthe 12 hour
operation.When the range isfirstpluggedin,or when
the power supplytothe range has been interrupted,the
timer in the display will flash.
To set the clock (example below for 1:30)
1. Press SET CLOCK. "CLO" will appear in the display.
2. Press 1 3 0 pads to set the time of day to 1:30.
"CLO" will stay in the display.
3. Press START. "CLO" will disappear and the clock will
start.
CHANGING BETWEEN 12 OR 24 HOUR
TIME OF DAY DISPLAY
1. Press and hold SET CLOCK for 6 seconds. "CLO" will
appear in the display.
2. CONTINUE holding the pad until "12Nr dAY" or
"24Hr dAY" appears in the display and the control
beeps once.
3. Press CLEAN to switch between the 12 and 24 hour
time of day display. The display will show either
"12Nr dAY" or "24Mr dAY".
4. PressSTART toacceptthechange or pressOFF to
rejectthechange.
5. Resetthe correcttime as describedinTo set the
Clock above.Pleasenote thatifthe 24 hour time
of day mode was chosen, the clock will now display
time from 0:00 through 23:59 hours.
Loading ...
Loading ...
Loading ...