Loading ...
Loading ...
Loading ...
IMPORTANT:Neverleaveemptycookwareonahotsurface
cookingarea,elementorsurfaceburner.
Idealcookwareshouldhaveaflatbottom,straightsides,awell-
fittinglidandthematerialshouldbeofmedium-to-heavy
thickness.
Roughfinishesmayscratchthecooktop.Aluminumandcopper
maybeusedasacoreorbaseincookware.However,whenused
asabaseitcanleavepermanentmarksonthecooktoporgrates.
Cookwarematerialisafactorinhowquicklyandevenlyheatis
transferred,whichaffectscookingresults.Anon-stickfinishhas
thesamecharacteristicsasitsbasematerial.Forexample,
aluminumcookwarewithanon-stickfinishwilltakeonthe
propertiesofaluminum.
Usethefollowingchartasaguideforcookwarematerial
characteristics.
COOKWARE CHARACTERISTICS
Aluminum • Heatsquicklyandevenly.
• Suitableforalltypesofcooking.
• Mediumorheavythicknessisbestfor
mostcookingtasks.
Cast iron
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Follow manufacturer's instructions.
• Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
Ceramic or
Ceramic glass
Copper • Heats very quickly and evenly.
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
Porcelain • See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel • Heats quickly, but unevenly.
• A core or base of aluminum or copper
on stainless steel provides even
heating.
/
TIMER
1. Clock
2. Display
3. Increase
4. Decrease
5. Timer
When power is first supplied to the appliance, everything on the
display will light up for 5 seconds. Then "PF" will appear on the
display,
Any other time "PF" appears, a power failure occurred, Reset the
clock. See "Clock" section.
When the oven is not in use, the display will show the time of day.
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
The colon will flash during Clock programming.
2. Press the "up" or "down" arrow pads to set the time of day.
The time can be changed in either small or 10 minute
increments by pressing a pad briefly or by pressing and
holding a pad.
3. Press CLOCK. The colon will stop flashing when the Clock is
active.
Loading ...
Loading ...
Loading ...