Loading ...
Loading ...
Loading ...
Device is
oine
Check your router's Internet connection.
Check the connection between the camera and
the router. If you change the router or change the
WiFi password, you need to reset the camera and
recongure the network.
Check the connection between the wireless NVR
and the router and the connection between the
camera and the wireless NVR. If you change the
router or change the wi password, you may
need to recongure the WNVR’s network.
Check if the camera battery is exhausted, you
can try to plug in the power and try again.
No preview
The server may be congested, try restarting the
app.
No push
notication
Make sure the app has notication permissions.
Please conrm that the alarm message push
switch is turned on in the App Personal Center
settings.Please conrm that the alarm message
push switch is turned on in the camera settings.
No recording
For direct connection to the router, please insert
SD card before booting.
Make sure the camera PIR (monitering) switch is
turned on.
Please make sure the camera recording switch is
turned on.
Please check the recording settings on the
wireless NVR.
Please check whether the SD card status is
normal in the App. If it is abnormal, try to format
the SD card.
2
3
4
5
8. FAQ
Q: Why does the battery run out quickly?
A: The App will count the daily recording time when playback
video. Please check if there are more videos every day. If
there are many false triggers, please try to lower the trigger
sensitivity setting.
4.5.1 Battery camera
4.5 Installation and placement
3M
Video playback
Cloud storage playbackAlarm information
1.Place on a desk or table,
As shown below.
2. Fix the battery camera on the wall or glass
First x the wall-mounted iron sheet to the wall with 3M glue
(smooth surface such as glass) or screws (brick wall, etc.),
put the magnetic base of the battery camera on the iron sheet,
and adjust the angle.
Q: What should I do if I forget my password?
A: If you have forgotten the login password of the App
account, please reset the password through the "Forgot
Password" option in the login interface as instructed.
Check if the WiFi signal between the camera and the
wireless NVR or router is weak. You can try to change the
WiFi channel of the wireless NVR or router; or adjust the
position of the wireless NVR, router or camera to improve
the signal transmission.
Q: How to conrm that the network connection between the
camera and the router or wireless NVR is normal?
A: Actively trigger PIR in front of the camera and wait for
about 10s.
If the camera ashes red, it means that the camera cannot
connect to the router or wireless NVR smoothly.
If it is connected to a wireless NVR, you can click play from
the corresponding channel of the NVR / touch screen. If the
video can be played, the connection is normal;
Whether the indicator of the corresponding channel on the
base station is always on. The blinking of the indicator
indicates that the base station and the battery camera have
been disconnected.
Q: When do wireless NVR (NVR/ touchable monitor / base
station) and battery camera need to be paired?
A: Matching code is to make the camera wi connect to the
wireless NVR automatically. The devices purchased in the
entire package is already matched code in the factory,
and no match code operation is required.
You need to match code when a new battery camera need
to be added to the wireless NVR;
The battery camera needs to be code matched after being
reset to factory settings;
The wireless NVR needs to be code matched after being
restored to the factory settings;
After deleting the paired cameras on the wireless NVR
channel through the App, you need to match code again.
The device's access password is set after the device is
added or modied by the App, and the App remembers it.
Subsequent access does not need to be re-entered. If the
password is changed through other methods (such as
WNVR changed the password in the local interface), please
ll in the new password to access in the corresponding
device column of the device list →More →Edit menu.
If you have lost the password saved by the App, you need
to restore the camera or wireless NVR to the factory settings,
and then reset the password.
FCC STATEMENT
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body.
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC CAUTION
Caution the user that changes or modications not expressly
approved by the party responsiblefor compliance could void
the user’s authority to operate the equipment.）
6. Camera pairing to wireless NVR
30-100cm
The battery camera shipped with the kit has already been
paired with the wireless NVR, no code matching is required.
After the pairing information of the camera and wireless NVR
is cleared, you need to match code again.
Note:
(2). During charging, the indicator
status is: The green light is always
on, and the indicator is o after
charging is completed.
(1). Place the battery camera and the wireless camera/Wireless
Touch Screen System /base station within 30-100 cm.
Please use the original battery, and use the camera or the
original charger to charge the battery.
Using other batteries will result in inaccurate power
display and may damage the camera.
Please charge the battery at room temperature. If the
temperature is too low or too high, the charging time will
be extended, and the battery will be damaged and the
battery life will be aected.
(4). Open the WNVR’s function of match code to add camera.
(2). While the battery camera
is turned on, press and hold the
RESET button for 6 seconds.
(3). When the indicator light
of battery camera become
to red light and fast ashing,
that means enter the code
matching mode.
Right-click the
mouse and select
“Wireless Add” to
check whether it is
added to the device.
If yes, click to exit;
otherwise, repeat
steps 2 and 3
above.
Tablet
WNVR
1.Click the screen,
click the “home”
icon, and click
the [Match
Code] module.
SYNC
NET
DC 5V
RESET
NVR
4
3
2
1
IPCAM
Sync
7. Troubleshooting
Trouble Solution
Unsuccessful
network
conguration
Make sure your phone, camera, and router are
close enough.
Note that the camera cannot support connection
to a 5G router.
Check that the router name and password are
correct.
Check the Internet settings of the wireless NVR.
1
2. Click the
“Match Code”
button. After
the adding is
successful,
click the “Stop”
button. Other-
wise, Otherwise,
repeat steps 2
and 3.
Press the SYNC button of the base station for 3 seconds,
and hear the voice prompts “Start matching code”, that is,
the base station is in matching code mode. When the base
station prompts “matching code successfully”, means the
matching code is completed, if the base station prompts
“The new device is not found", Please repeat steps 2 and
3 above.
Base station
4.5.2 Battery Bullet Camera
(1). Use the mounting sticker to
locate and bore holes, and the
cement wall must be nailed into
the rubber plug;
(1). Use the mounting sticker to locate
and bore holes, and the cement wall
must be nailed into the rubber plug;
(2). Fix the base with screws;
(3). Adjust the camera's pitch
angle to a proper position
and tighten the xing screws;
(3). Adjust the camera's pitch
angle to a proper position
and tighten the xing screws;
(4). The camera can be
charged with solar panels.
H113/115
4.5.3 Solar Dome Camera
H113/115
(2). Fix the base with screws;
Recommended
installing the
camera about
2.5-3M
PIR is sensitive to hot and cold disturbances, please note:
5. Charging instructions
During use, if it is found that the APP pushes low battery
message or the camera has a low battery warning indicator,
you need to charge the camera, as shown in the gure.
(1). Connect the USB power supply to the battery camera .
Avoid installing the camera where the air ow is agitated.
For example: the air outlet of the air conditioner, the heat
dissipation port of the equipment, the side of the fan, the
vicinity of the curtain, etc.
Please to install the camera is about 2.5M-3M.
When installing, avoid direct access to personnel. It is
best to install it on the side of the access route or maintain
an angle. Do not ip the camera upside down (infrared
body sensor on top, lens on bottom).
Battery camera
Batteery bullet camera
(4). When the solar panel is
installed outdoors, it can be
connected with the ball
machine through an
extension cord.
Accessories needed
(not standard conguration)
1xBracket
3.After connecting with
its own WiFi according
to the guiding interface,
return to APP;
4. Set the name and
password for the device
then you can add it to
the device list;
Note: The direct connection needs to be maintained with the
device's own WiFi connection in order to preview the video
of the device normally.
Adding method 2: To use with wireless NVR, please rst
power the wireless NVR and connect it to the Internet.
After adding the wireless NVR by scanning the ID QR
code on the body of NVR or displayed on the screen with
the APP, you can check the battery camera on the APP.
1. When the WNVR (base station,
network hard disk recorder and
touch screen) is powered on,
connect the WLAN network (some
models support wireless connection)
to the router which is already
connected to the Internet;
2. Open the APP and click on the "+"
in the upper right corner to enter the
scan code interface;
4.4 Notication, Preview and Playback
1. Click the push information or "info" button to view the alarm
information of the camera.
2. Click the corresponding play icon on the device list to enter
the preview interface to view real-time video and have voice
intercom.
3.Click the playback or cloud icon to view the video which is
on the device or in the cloud.
4.Tap the share icon to share the camera to others.
Device Remote viewing
Playback
3. Scan the ID QR code on the
wireless NVR body or the screen,
and add the device according to
the simple setting guided by the
APP. The camera paired to the
wireless NVR will be directly
displayed in the device list.
Loading ...
Loading ...
Loading ...