Loading ...
Loading ...
Loading ...
ASSEMBLY / PRE-OPERATION
INSTALL DISCHARGE CHUTE/CHUTE ROTATER HEAD
(See Fig. 7)
NOTE: The multi-wrench provided in your parts bag may
be used to install the chute rotater head.
1. Place discharge chute assembly on top of chute base
with discharge opening toward front of snow thrower.
2. Position chute rotater head over chute bracket. If nec-
essary, rotate chute assembly to align square and pin
on underside of chute rotater head with holes in chute
bracket.
3. With chute rotater head and chute bracket aligned,
position chute rotater head on pin and threaded stud
of mounting bracket.
4. Install 3/8 washer and Iocknut on threaded stud and
tighten securely.
CHUTE
ROTATER
_3/8 LOCKNUT
3/8 WASHER
CHECKTIRE PRESSURE
The tires on your snow thrower were overinflated at the fac-
tory for shipping purposes. Correct and equal tire pressure
is important for best snow throwing performance.
• Reduce tire pressure to 14-17 PSI.
CHUTE
PIN
STUD
ROTATER HEAD
MOUNTING
BRACKET
FIG. 7
Loading ...
Loading ...
Loading ...