Loading ...
Loading ...
Loading ...
13
Product Controls
2. Set the desired baking time:
Once the start time is set, the display will switch to :00 and
the words
SET
,
COOK
and
TIME
will appear on the right side of the display. You will now enter the desired baking
time. Add 30 minutes to the desired bake time to allow for preheat.
Turn the “SET” knob until the desired baking time is displayed in hours and minutes. Once the desired bake time is set,
the word
SET
will disappear and the word
DELAY
will appear in the display indicating that the Bake Hours program has
been set.
NOTE: For Double Ovens, the word
DELAY
will show with either
UPPER OVEN
or
LOWER OVEN
depending on which
oven has been selected.
3. Set the Oven Function selector to the desired function – BAKE, CONVECTION BAKE, OR TRUCONVEC™, etc.
4. Set the temperature control knob to the desired baking temperature.
5. The automatic time bake program is now set!
NOTE: The display will continue to show the amount of bake time that was programmed (this will remain until the
programmed start time is reached). You can return the display to clock mode by pressing the “CLOCK” button on the
Select models or “PROBE” on the French door models. Notice that a small clock will be displayed in the upper right
corner to indicate that a program is in progress. Switch back to the timer mode by pressing the “BAKE HOURS” button.
6. When the specified time is reached, the oven will automatically turn on. It will bake for the programmed amount of
time at the selected temperature.
NOTE: At one minute from the end of the specified bake program, the oven timer will beep once. At the end of the
specified bake program, the oven will automatically turn off and the timer will sound a series of three beeps. This will
continue until the “START TIME” button is pressed. The display will then return to displaying the time.
NOTE: Setting the remaining duration time to :00 will cancel the Automatic Bake program.
Clocks and Timers
(Digital Display - Select / French Door Models)
Sabbath Mode (Digital Display models only)
To set the Sabbath Mode
1. Press the Min/Sec Timer button until it beeps.
2. Turn SET knob until SAB appears in the display.
3. Press the Min/Sec Timer button to toggle between NO or ON. NO is the default setting.
4. After selecting ON, turn SET knob to done.
5. Press Min/Sec Timer button to clear display.
To remove Sabbath Mode
Follow the same steps above and select the NO setting.
Loading ...
Loading ...
Loading ...