Loading ...
Loading ...
Loading ...
Operatin
instructions
Status window
That STATUS window displays codes typically seen
during normal operation or programming of the
dishwasher. The STATUS window indicates the
following activity:
1h - 24h
CL
hoe
Indicates number of
delay start hours for
selected cycle.
Flashes once the
program has been
entered and the
START pad is pressed.
It also flashes if the
door is opened during
a wash cycle. Close
the door to begin or
continue the wash cycle,
Child Lock is activated.
Minutes
L1 - L4
The cycle duration or
the remaining time.
Level of Rinse Aid
Dosage.
Blue light indicator
When the BLUE LIGHT illuminates on the floor this
indicates that the wash cycle is complete.
Error Codes
Displayed
Error Code*
i10
i20;
i40;
iF0
i30
Problem
A low fill has been detected.
Clogged filters or a restricted
drain line has been detected.
A leak or overflow of water
has been detected in the
bottom pan.
Solution
Look for a pinched water supply line, or water shutoff is
not completely opened.
Check and clean both filters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug
has been removed.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled,
A problem has been
i50 detected with the drain or
wash motor, Pressing the cancel button or turning power off at the
A problem has been breaker for 5 min. should clear this error code and
i60 detected with the water the unit can be restarted,
heating system,
A problem has been If this does not resolve the problem, service
iC0 detected with the electronic will need to be called.
control system.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min.
does not resolve the problem, contact the Electrolux Customer Care Center at 1-877-435-3287.
Loading ...
Loading ...
Loading ...