DRAPER 89524 User Manual

Loading ...

4. INTRODUCTION

4.1 SCOPE

This cordless drill driver is designed for use with a variety of drill bits, intended for drilling holes in

wood, plastic, metal, etc. It is intended for domestic use.

Any other application is considered misuse.

This power product is supplied “naked”; without battery pack or charger. Draper 20V Power

Interchange tools all use universal 2.0 and 4.0Ah batteries and chargers, enabling each battery pack

to fit all tools within the range (see the table on page 11 for the batteries and chargers available).

4.2 SPECIFICATION

Stock No................................................................................................................................... 89524

Part No. ................................................................................................................................ CD20SF

Battery packs (sold separately):

Stock No. .................................................... 89437.............................................................. 89433

Part No..................................................... B202LISF....................................................... B20LISF

Type ............................................................ Li-ion ............................................................... Li-ion

Rated Voltage ..............................................20V ...................................................................20V

Rating ......................................................... 2.0Ah ..............................................................4.0Ah

Chargers (sold separately):

Stock No. .................................................... 89425.............................................................. 23793

Part No......................................................... CB20 .......................................................... CB203.5

Rated Voltage ............................................ 230V~ .............................................................230V~

Rated Frequency ........................................ 50Hz ................................................................50Hz

Rated D.C. output voltage ...........................21.5V...............................................................21.5V

Rated D.C. output current ............................ 2.4A ..................................................................3.5A

Protective device rated current ...................... 8A ......................................................................8A

Construction ..............................................Class II .......................................................... Class II

Maximum torque....................................................................................................................... 35Nm

Revolutions Per Minute (no load) .................................................................. 0 – 400

0 – 1,400r/min

Chuck capacity................................................................................................................... 2 – 13mm

Spindle thread .................................................................................................................. 1/2 × 20unf

Drill capacities: ...................................................................................................................................

Wood.................................................................................................................................... 35mm

Mild steel.............................................................................................................................. 13mm

Sound Pressure Level*..........................................................................................................73dB(A)

Sound Power Level** ............................................................................................................84dB(A)

Vibration Level.................................................................................................4.567m/s

, K=1.5 m/s

Weight (machine only)..............................................................................................................1.11kg

4.3 HANDLING & STORAGE

– Care must be taken when handling this product.

● Dropping this power tool could have an effect on its accuracy and could also result in

personal injury. This product is not a toy and must be respected.

– Environmental conditions can have a detrimental effect on this product if neglected.

● Exposure to damp air can gradually corrode components.

● If the product is unprotected from dust and debris, components will become clogged.

● If not cleaned and maintained correctly or regularly, the machine will not perform at its best

* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to prEN ISO 15744:1999

and declared according to EN ISO 4871.

** A-Weighted Sound Power Level in accordance to prEN ISO 15744:1999 and declared according to EN ISO 4871.

- 5 -- 16 -

9.7 LED WORKLIGHT – FIG.10

To aid use in confined, and inadequately lit spaces;

the LED worklight



automatically illuminates

when the trigger is activated.

9.8 SCREWDRIVING

To prevent slip or damage to the screw head, match

the screwdriver bit to the screw head size.

To remove screws:

– Move the direction switch to the reversing

position and apply pressure to the screw head

and depress the trigger slowly).

Screwdriver bits are consumable items.

9. BASIC OPERATION

FIG.10



Warning!

● Before drilling check that there are no

hidden hazards such as electrical

cables, water or gas pipes running

below the surface by use of a

metal/voltage detector.

● Do not expose either the drill or

charger to rain or water.

● Do not overcharge the battery pack

(more than six hours) as this

could damage the battery cells.

9.9 DRILLING WOOD AND

PLASTIC – FIG. 11

To prevent splitting around the drill holes on the

reverse side, clamp a piece of scrap timber

under the material to be drilled.

9.10 DRILLING METAL – FIG. 12

Metals such as mild steel, aluminium and brass

may be drilled.

– Mark the point to be drilled with a centre punch to help the drill bit tip to locate.

– A drop of oil on the drilled area will aid cutting and help prolong the life of the bit.

Note: Although metal drilling is technically within the capabilities of this drill, its rotational speed is

not always fast enough to achieve perfect results every time. For this reason, extra caution should

always be taken when drilling metal, as snagging of the drill may occur.

FIG.11

FIG.12

+++

++++

++++++++

++++

Loading ...

DRAPER 89524 Storm Force 20V Drill Driver (Sold Bare)

User Manual - Page 5