Loading ...
Loading ...
Loading ...
5. HEALTH & SAFETY INFORMATION
Remove and check setting tools. Some machinery requires the use of additional tools or keys to set,
load or adjust the power tool. Before starting the power tool always check to make certain they have been
removed and are safely away from the machine.
Prevent unintentional starting. Before plugging any machine in to the power supply, make sure the
switch is in the OFF position. If the machine is portable; do not hold the machine near the switch and take
care when putting the machine down; that nothing can operate the switch.
Carefully select an extension lead. Some machines are not suitable for use with extension leads. If the
tool is designed for use outdoors; use an extension lead also suitable for that environment. When using
an extended lead, select one capable of handling the current (amps) drawn by the machine in use. Fully
extend the lead regardless of the distance between the power supply and the tool. Excess current (amps)
and a coiled extension lead will both cause the cable to heat up and can result in fire.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a power tool if
you are under the influence of drugs (prescription or otherwise), including alcohol or if you are feeling tired.
Being disorientated will result in an accident.
Have this tool repaired by a qualified person. This tool is designed to confirm to the relevant
international and local standards and as such should be maintained and repaired by someone qualified;
using only original parts supplied by the manufacturer: This will ensure the tool remains safe to use.
5.2 CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the machine’s rating plate are compatible with the power
supply you intend to connect it to.
These vacuum cleaners come supplied with a UK standard 3 pin plug fitted. It is designed for connection
to a domestic power supply rated at 230V AC.
Apart from replacing the fuse in the plug, no other electrical work is recommended on this product.
If an extension lead is required, use an approved and compatible lead rated for this appliance. Follow all
the instruction supplied with the extension lead.
CAUTION: Risk of electric shock. Do not open.
This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse fitted is
marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute is of the correct
rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced before
attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement must be obtained
or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable shall be disabled to prevent connection to a live
electrical outlet.
This appliance is Class I
†
and is designed for connection to a power supply matching that detailed on the
rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance. Follow all the
instruction supplied with the extension lead.
†
Earthed : This product requires an earth connection to protect against electric shock from accessible
conductive parts in the event of a failure of the basic insulation.
Draper Tools recommend that this vacuum is used with an RCD (Residual Current Device),
Draper Stock No.69307.
7
Loading ...
Loading ...
Loading ...