Loading ...
Loading ...
Loading ...
Cleaningthe glass cooktop, ransomemode/s
Clean yourcooktopafter
each spill. Use CERAMA
BRYTE® Ceramic Cooktop
Cleaner.
Normal Dailg Use Cleaning
ONLY useCERAMABRYTE®Ceramic
Cooktop Cleaneron the glass cooktop.
Other creams nag not be as effective.
To maintain and protect the surface of
gour glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE® Ceramic Cooktop Cleaner.
This helps protect the top and makes
cleanup easier.
[_ Dailg use of CERAMABRYTE®Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
%
Shakethecleaningcream well.
Applga few dropsofCERAMA BRYTE®
CeramicCooktopCleanerdirectlg
tothecooktop.
Usea paper towel or CERAMA
BRYTE®Cleaning Pad for Ceramic
Cooktopsto clean the entire cooktop
surface.
[] Use a drg cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO
NOT heat the cooktop unti! it has been
cleaned thoroughly.
Usea CERAMABRYTE®CleaningPadfor
CeramicCool<tops.
Burned-On Residue
NOTE: DAMAGEto Four glass surface
may occur if you use scrub pads other
than those recommended.
I-f] Allow the cooktop to cool.
[] Spread a few drops of CERAMA
BRYTE®Ceramic Cooktop Cleaner
on the entire burned residue area.
%
Using the included CERAMABRYTE¢
Cleaning Padfor Ceramic Cooktops,
rub the residue area, applging
pressure as needed.
[]
%
If ang residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE®Ceramic Cooktop Cleaner
and a paper towel.
TheCERAMABRYTE®CeramicCool<top
Scraperand all recommendedsupplies
are availablethrough our PartsCenter.
Seeinstructionsunder"To OrderParts"
sectionon next page.
NOTE:Do not usea dull or
nickedblade.
Heavg, Burned-On Residue
[]
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximatelg a 45 °
angle against the glass surface and
scrape the soil. It will be necessarg
to applg pressure to the razor
scraper in order to remove the
residue.
%
After scraping with the razor
scraper, spread a few drops of
CERAMABRYTE®Ceramic Cooktop
Cleaneron the entire burned residue
area. Use the CERAMABRYTE®
Cleaning Pad to remove any
remaining residue.
[]
For additional protection, offer all
residue has been removed, polish
the entire surface with CERAMA
BRYTE®Ceramic Cooktop Cleaner
and a paper towel.
30
Loading ...
Loading ...
Loading ...