Loading ...
Loading ...
Loading ...
COOKTOP CONTROLS - TRADITIONAL KNOB MODELS
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The controls can be set anywhere between HI and LO.
NOTE: Where 240V installation is not available, this cooktop will
automatically adjust to 208V operation.
OFF
To Use:
Push in and turn knob to desired heat setting.
Use the following chart as a guide when setting heat levels.
SETTING RECOMMENDED USE
Hi • Bring liquid to a boil.
Med Hi
Medium High
Med
Medium
Med Lo
Medium Low
Lo
Dual/Triple Circuit
Elements
• Hold a rapid boil.
• Quickly brown or sear food.
• Maintain a slow boil.
• Fry or saute foods.
• Cook soups, sauces and
gravies.
• Stew or steam food.
• Simmer
• Keep cooked foods warm.
• Melt chocolate or butter.
• Home canning.
• Large-diameter cookware.
• Large quantities of food.
I EMEMBER: When cooktop is in use, the entire cooktop
area may become hot.
I
Hot Surface Indicator Lights
The Hot Surface Indicator Lights are located next to each of the
cooktop controls. The Hot Surface Indicator Lights will glow as
long as any surface cooking area is too hot to touch, even after
the surface cooking area(s) is turned off.
A ....................'_o_,
A. Hot surface indicator light
If the cooktop is on when a power failure occurs, the Hot Surface
Indicator Lights will remain on after the power is restored to the
cooktop. They will remain on until the cooktop has cooled
completely.
Power Light
Each cooktop has a Power On light. The light will glow when any
burner is on.
0
POWER
The dual-size and triple-size elements offer flexibility depending
on the size of the cookware. Single size can be used in the same
way as a regular element. The dual and triple sizes combine
single, dual and outer element and are recommended for larger
cookware, large quantities of food, and home canning.
A.Single size
B.Dualsize
C.Triplesize
To Use SINGLE:
1. Push in and turn knob from the OFF position to the SINGLE
zone anywhere between LO and HI.
2. Turn knob to OFF when finished.
To Use DUAL and TRIPLE:
1. Push in and turn knob from the OFF position to the DUAL or
TRIPLE zone anywhere between LO and HI.
2. Turn knob to OFF when finished.
12
Loading ...
Loading ...
Loading ...