CIT304YB User Manual

Loading ...

en-us Electrical connection

4.2 Securing the cooktop to the countertop

The cooktop must be secured from below using the hold-

down brackets provided, so it does not slip.

1. Place the cooktop face down on a soft underground.

2. Attach the hold-down brackets to the underside of the

cooktop with the provided short screws . Do not

tighten the screws.

3. Rotate the hold-down brackets so that the appliance

can be placed in the cutout.

CAUTION Do not let the cooktop drop into place.

▶

Make sure that the cooktop is supported along the

edges when carefully placing it into the cutout.

Turn the cooktop over and place it carefully into the

countertop cutout.

5. Insert the clamping screws into the hold-down bracket

and secure the cooktop to the countertop . Protect

delicate countertops by placing a wooden disk under-

neath.

6. Tighten the hold-down bracket screws on the cooktop

underside.

Electrical connection

5 Electrical connection

Electrical connection

Read these instructions to safely connect your appliance

to the electrical supply.

5.1 Electrical requirements

Ensure that the following general requirements are met.

¡ You can find the rating plate with the electrical specifi-

cations on the underside of the appliance.

→

"Rating plate location", Page9

¡ The junction box must be located within 3feet of the

cooktop connection. It should be easily accessible for

service purposes.

max. 2¾" (69mm) + fitting/conduit 1" (25mm)

min. 1" (25mm) air clearance

approx. 12" (300mm)

junction box

flexible conduit approx. 3ft. (900mm)

Power supply

All models must be connected with the included 39" (1m) flexible conduit.

Models 240V AC, 3-wire, 60Hz system: cir-

cuit breaker

208V AC, 3-wire, 60Hz system: cir-

cuit breaker

CIT304YB 30A 30A

CIT304YM 30A 30A

CIT365YB 50A 50A

CIT367YG 50A 50A

CIT367YGS 50A 50A

CIT367YM 50A 50A

CIT367YMS 50A 50A

5.2 Connecting electrical supply

WARNING

Before installing, turn power OFF at the service panel.

▶

Lock service panel to prevent power from being turned

ON accidentally.

Note:If the cooktop is installed and connected as speci-

fied here, it will be grounded in compliance with the Na-

tional Electrical Code.

1. Install a suitable junction box (not furnished).

The branch-circuit breakers ampacity, the wire sizes

and the connections must conform to the requirements

of the National Electrical Code or Canadian Electrical

Code and all local codes and ordinances.

Loading ...

User Manual - Page 8