Loading ...
Loading ...
Loading ...
How to Stop Your Pressure Washer
1. Let engine idle for two minutes.
2. Move throttle lever on engine to "Stop" position.
3. ALWAYS point gun in a safe direction and
squeeze spray gun trigger to release retained high
water pressure.
IMPORTANT: Spray gun traps high water pressure,
even when engine is stopped and water is disconnected.
WARNING
,
Keep high pressure hose connected to pump and spray
gun while system is pressurized.
ALWAYS point gun in safe direction and squeeze spray
gun trigger, to release high pressure, every time you stop
engine. Engage trigger lock when not in use.
Engage trigger lock on spray gun when not in use.
How to Use Accessory Tray
The unit is equipped with an accessory tray with
places to store your nozzle extension, spray gun,
turbo nozzle, and ProjectPro TM nozzles. There is also
a hook at the front of the accessory tray to hold your
high pressure hose.
NOTE: The extra hole in the tray is for storing a utility
brush. The brush is NOT included with your pressure
washer. You can buy the brush as an optional accessory.
1. Place nozzle extension through hole on accessory
tray, as shown.
Typical Pressure
Washer Shown
How to Use ProjectPro TM Nozzle System
The quick-connect on the nozzle extension allows you
to switch between four different ProjectPro TM system
nozzles. The ProjectPro TM nozzles vary the spray
pressure and pattern as shown.
LowPressure
Black
Use to apply
detergent
High Pressure
Delicate General Max
40° Yellow 15° Orange 0° Red
1650 PSI 1950 PSI 2200 PSI
2.2 GPM 2.1 GPM 1.9 GPM
Follow these instructions to change ProjectPro TM
nozzles:
1. Engage trigger lock on spray gun.
CAUTION
NEVER exchange ProjectPro TM nozzles without
engaging the trigger lock on the spray gun.
DO NOT twist ProjectPro TM nozzles while spraying.
2. Pull back collar on quick-connect and pull current
ProjectPro TM nozzle off. Store ProjectPro TM
nozzles in holder provided on the accessory tray.
3. Select desired ProjectPro TM nozzle:
• For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats,
RV's, patio furniture, lawn equipment, etc.,
select yellow Delicate ProjectPro TM nozzle.
2. Place spray gun through hole on accessory tray
on right side of unit.
3. Push turbo nozzle up and into clip on accessory
tray until it snaps in as shown.
4. Hang high pressure hose on hook attached to
accessory tray on front of tray as shown.
5. Insert multi-colored ProjectPro TM nozzles in
spaces provided in accessory tray.
11
Loading ...
Loading ...
Loading ...