Loading ...
Loading ...
Loading ...
iMPORTANT:This unitis shippedwiththeengine fullof oil. After
assembly,see page 10for fuel andoildetails.
Removing From Carton
1. Cut the cornersof thecarton and lay the sidesflat on the ground.
Removeall packinginserts.
2. Movethe snowthrowerout of thecarton.
3. Makecertainthe cartonhas beencompletelyemptiedbefore
discardingit.
DO NOTliftthe snowthrower bythe chute handle.
Before Assembly
NOTE: Referenceto right,left, frontor rearof the unit isfromthe
operatingposition,facingforward,unlessotherwisestated.
Setting Up The Handle
NOTE: Be awareof the three looselyfitted cableties attachedto the
lowerhandlethat will be utilizedlaterto securethe cables.
1. Loosenand removethe wing knob,saddlewasher,handletab and
carriagescrew on eachside of the lowerhandle.See Figure1.
2. Slidethe looselyfitted cabletie from the rightside of the lowerhandle up
to thecross memberof the lowerhandle.Leavethe secondcabletie in
placeon the rightside of the lowerhandle.See Figure3 for reference.
iMPORTANT: Itwill be necessaryto lift the upper handlewhilesliding up
thiscable tie to preventdamage to thecable.
3. Lift the upper handle up and position it over the lower handle,
aligning the holes where the wing knobs were removed (1). See
Figure 2.
Becarefulnot to bendor kink the cables.
4. Inserta carriagescrewfromthe outsidethrougha handletab,the
upperand lowerhandles,a saddlewasherand intothe wing knob
(2). Repeatonthe otherside.
5. Tightenthewing knobson each sideof the handle.Referto Figure
2.
NOTE:The augercable routesdownthe left lowerhandleandthe
drivecableis routedacrossthe top of the lowerhandleanddownthe
rightside of the lowerhandle.SeeFigure3.
.
Threecabletieshavebeen usedto looselytie the controlcables
to the lowerhandle,includingthe cabletie you relocatedin step 2.
Positioncable tiesnow,as inFigure3, andtighten to securecables
to the lowerhandle.Trimoff excess materialof cableties.
f
Figure 1
Drive Cable
Figure 2
/
get Cable
_js jj
J
Figure 3
8
Loading ...
Loading ...
Loading ...