Loading ...
Loading ...
Loading ...
Your Russell Hobbs Air Conditioner has been supplied with a
Window Sealing Kit. The kit is suitable for use on UPVC windows
that open internally or externally either 3 sides, or 4 sides. It is not
suitable for middle opening windows such as skylights, or wooden
frames.
The maximum aperture dimensions of the kit is 400cm. To measure
the dimensions of a 4 point window, measure the frame on all 4
sides. For a 3 point window, measure the frame on the open sides
only.
INSTALLING YOUR WINDOW KIT
To install this window seal, whilst the
window is closed, apply the Velcro tape on
both the inside frame of the window, and
the frame of the window as shown by the
dotted lines. Ensure that the tape is not
clamped or in a position it will become
clamped.
Apply the long side of the seal kit to the
outside frame, and the short side to the
inside window.
Open the window, and ensure there is a
sufficient seal.
Open the zip, and thread your air
conditioner hose through the opening,
then tighten the zip.
11v2.4RHPAC4002
Loading ...
Loading ...
Loading ...