Loading ...
Loading ...
Loading ...
Using Two VCRs for Copying and Editing Tapes
Operating Instructions (Refer to hookup on page 6.)
Use one VCR as the playback VCR and the other as the recording VCR.
1. Turn on the TV and VCRs.
Caution: The unauthorized
recording of television
programs and other
materials may infringe the
rights of others.
2. Tune the TV to the VCR viewing channel, either 3, 4, or the TV's
video input.
3. If you connected your VCR using Option A, (page 6), tune recording
VCR to channel 3 or 4 - the one you selected on the back of the
playback VCR.
If yon connected your VCR using Option B, (page 6), press INPUT on
the recording VCR's remote to select the line input.
4. Insert the tape yon want to copy into the playback VCR. Insert a blank
tape with its safety tab in place into the recording VCR.
5.
Press PLAY, then PAUSE on the playback VCR when you reach the
point on the tape or program where you want to begin copying. If the
tape was not recorded on the playback VCR, streaks may appear and
you may need to adjust tracking.
6. Press RECORD and PLAY together on the recording VCR or REC on
the remote. Then, press PAUSE on recording VCR.
7. Press PAUSE on both VCR at the same time to begin copying the tape.*
8,
Edit out segments that you do not want to copy by pressing PAUSE on
the recording VCR to stop copying the tape. Then, locate the next
segment you want to copy on the playback VCR by using FWD, REW,
and PLAY. Press PAUSE on the playback VCR. Press PAUSE at the
same time on both VCRs to resume copying.
9. Press STOP.EJECT on both VCRs when you are finished.
* You may turn off the TV after the recording has started as it does not have
to be on to copy a tape.
Copying and editing using compatible remote
If you have a compatible RCA or ProScan remote with VCR1 and VCR2 buttons you
can program this VCR to respond to VCR1 (VCR2). This lets you control both VCRs
with one remote for easier copying and editing.
Set the REMOTE CONTROL feature of this VCR to the VCR1 or VCR2 position. Then,
the compatible remote controls the VCR with either the VCR1 or VCR2 button --
depending on the position you select in the menu.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display SETUP OPTIONS.
3. Press 1 to activate the REMOTE CONTROL: VCR1 or
VCR2 feature.
4. Press VCR1 or VCR2 on your compatible VCR's
remote to change the setting and program the VCR to
respond to VCR1 or VCR2 -- depending on the
position you selected in step 3.
VCR MAIN MENU
TIMER PROGRAMMING
REVIEW PROGRAMS
CHANNEL SETUP
VCR SETUP OPTIONS
SETUP OPTIONS
I REMOTE CONTROL: VCRI
2 AUTO PLAY: ON
PRESS VCR2 TO CHANGE
SETUP OPTIONS
1 REMOTE CONTROL: VCR2
2 AUTO PLAY: ON
0 EXIT TO MAIN MENU
22
Loading ...
Loading ...
Loading ...