Samsung WA50F9A6DSW/A2-00 User Manual

Loading ...

16_ installing your washer

Connecting the drain hose

The end of the drain hose can be positioned in

three ways:

Over the edge of a wash basin

Secure the guide to the side of the basin wall

with a hook or to the tap with a piece of string to

prevent the drain hose from moving.

In a standpipe or laundry tub

The standpipe must be no shorter than 39 in (99

cm) and no longer than 96 in (245cm).

Make sure that the connection between the

drain hose and the standpipe is not airtight.

STEP 3

Leveling your washer

See if the washer is level by checking the position of the tub:

1. Slide the washer into position.

2. Open the lid of the washer, and pour the water into the tub to

just below the pulsator level.

3. If the washer is level, the pulsator is positioned at the center of the

water as shown in the ﬁgure. If not, level your washer by turning the

front leveling feet clockwise or counterclockwise as necessary.

Turn the front leveling feet clockwise to raise the washer, and

counterclockwise to lower the washer.

installing your washer

Laundry tub Stand pipe

Hose

retainer

Tie

strap

39” Min

(99 cm)

96” Max

39” Min

Loosen Lock

Pulsator

Adjustable legs

(three)

F900A WASH_WA50F_USER MANUAL_DC68-03133H_EN.indd 16 2013-1-23 16:48:47

Loading ...

Samsung WA50F9A6DSW/A2-00 27 Inch Top-Load Washer with 5.0 cu. ft. Capacity