Loading ...
Loading ...
Loading ...
NOTE: The blade may be installed with the teeth pointing up or down,
according to the needs of the cutting operation.
REMOVING SAW BLADE (Fig. 5)
1. Unplug the saw.
2. Rotate the sleeve counter-clockwise, and then pull the blade out.
_k WARNING: Do not remove the blade immediately after the cutting; the blade
may be very hot!
BLADE SELECTION
To obtain the best performance from the saw, it is important to select the correct
blade for the particular application and type of material you wish to cut. This will
produce a smoother, faster cut and prolong blade life.
BASE (SHOE) ASSEMBLY
To Slide Shoe in or Out: (See Fig.6)
The base assembly slides in I
or out to adjust the effective Fig. 6
I
stroke length for maximum
control and longer blade life.
1. Unplug the saw.
2. Loosen the two Hexagon
Socket Screws with the
hex key.
3. Pull the shoe base to
desired position.
4. Tighten the Hexagon
socket screws
socket
screw
To Pivot Shoe: (See Fig.6)
The shoe pivots to provide maximum control against the surface being cut.
1. Unplug the saw.
2. Firmly hold the saw and then pivot the shoe to the desired position.
17175 Manual_Revised_08 0724 Page 13
Loading ...
Loading ...
Loading ...