Loading ...
Loading ...
Loading ...
ON/OFF SWITCH AND VARIABLE SPEED CONTROL (Fig. 3}
Your reciprocating saw is
equipped with a trigger switch
to turn the saw on and off and
to control the speed.
1.
2.
3.
To start the saw, squeeze
the trigger switch.
To stop the saw, release the
trigger switch and allow it to
return to the "OFF" position.
To vary the speed, simply
increase or decrease the
pressure on the trigger
switch. The more tightly the
trigger switch is squeezed,
the higher the speed.
LED WORKMGHT (Fig. 4)
This LED Worklight is located
on the front of the saw and
provides additional lighting on
the surface of the workpiece
for operation in lower-light
areas. The worklight will turn on
when plugged in. The worklight
will turn off when the saw is
unplugged.
Fig. 3
Fig. 4
LED
INSTALLING SAW
BLADE (Fig. 5}
1. Unplug the saw.
2.
While rotating the sleeve
of the clamp counter-
clockwise, insert the saw
blade into the blade clamp
as far as possible, then
release the sleeve; the
blade will lock in place
automatically.
Fig. 5
i i_]i
17175 Manual_Revised_08 0724 Page 12
Loading ...
Loading ...
Loading ...