Loading ...
Loading ...
Loading ...
- 7 -
mode button for about 5 seconds to enter the timer setting.
OPERATION
1. Plug the appliance into an appropriate electrical outlet.
2. Press the power switch to the position “I” to connect the power.
3. Press the on/standby button to start the appliance. The LED screen shows the room temperature. The
appliance works in default setting --- cool airflow (no heating). Now the mode button is displayed in blue
color.
4. Press the mode button once, the appliance works in low heating (in half power 750W, the mode button
displayed in orange color); press the mode button again, the appliance works in high heating (in full power
1500W, the mode button displayed in red color); press the mode button the third time, the appliance will go
back to the cool airflow and the mode button is displayed in blue again. These three settings are cycled with
each press of the mode button.
5. To set the desired temperature, press the button “+”/ “-” to select among the range 10-35℃. The default
setting is 25℃. In heating mode, the appliance will automatically maintain the set temperature. It will start
working when the room temperature is 2 ℃ below the setting, and stop working when the room
temperature is above the setting.
6. In order to set the timer, long press the mode button on the control panel for about 5 seconds, or simply
press the button on the remote control. Press the button “+”/ “-” to select a numeral (≤24). It means
in how many hour(s) the appliance will turn into standby automatically. For example, you select a numeral
as “2”, then the appliance will go into standby automatically in 2 hours. The selected numeral will flash for
several seconds, and then the LED screen shows back to the room temperature. The timer is settled. To
cancel the timer, just set the numeral as “0”.
7. When it is in operation, press the on/standby button to turn the appliance into standby. If the appliance has
worked before with the heating function, its fan keeps working for 30 seconds with a countdown on the
display.
8. After use, press the power switch to the position “O” to switch off the appliance.
SAFETY SYSTEM
⚫ The appliance has a safety system which automatically switches off the unit when overheated.
⚫ If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at
least 30 minutes. Put the plug in the socket and switch on the heater.
⚫ This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically
switch off the power if it is put on unstable or uneven surface or if it is tilted accidentally.
MAINTENANCE
⚫ The fan heater only needs regular cleaning on the outside.
⚫ Before you clean the appliance, press the power switch to the position “O” to switch off the appliance.
Remove the plug from the socket and wait until the fan heater cools down completely.
⚫ Use a damp cloth to wipe the heater housing.
⚫ Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 1500W
Loading ...
Loading ...
Loading ...