Loading ...
Loading ...
Time Saver
Selecting this option enables you to suitably adjust drum rotation,
temperature and water to a reduced load of lightly soiled cotton and
synthetic fabrics. Time Saver enables you to wash in less time thereby
saving water and electricity. We suggest using a liquid detergent suitably
measured out to the load quantity.
Intensive Wash
Because a greater quantity of water is used in the initial phase of the
cycle, and because of the increased cycle duration, this function oers a
high-performance wash.
Easy Iron
By selecting this function, the wash and spin cycles will be modied in
order to reduce the formation of creases. For the 5 wash cycle, the machine
will end the cycle while the laundry is soaking and the EASY IRON and
START/PAUSE indicator lights will ash. To drain the water so that the
laundry may be removed, press the START/PAUSE button or the EASY
IRON button.
Delay Timer
To set a delayed start for the selected programme, press the
corresponding button repeatedly until the required delay period has
been reached. To remove the delayed start option press the button until
the text “OFF” appears on the display.
Temperature
Each wash cycle has a pre-dened temperature. To modify the
temperature, press the button. The value will appear on the display.
Spin
Each wash cycle has a pre-dened spin speed. To modify the spin speed,
press the button. The value will appear on the display.
Drying cycle
The rst time the button is pressed, the machine will automatically select
the maximum drying cycle which is compatible with the selected wash
cycle. Subsequent presses will decrease the drying level and then the
drying time, until the cycle is excluded completely (“OFF”).
Drying may be set as follows.
A - Based on the desired laundry dryness level:
Iron dry: suitable for clothes which will need ironing afterwards. the
remaining dampness softens creases, making them easier to remove; “A1”
appears on the display.
Hanger dry: ideal for clothes which do not need to be dried fully; “A2”
appears on the display.
Cupboard dry: suitable for laundry which can be put back in a cupboard
without being ironed; “A3” appears on the display.
Extra dry: suitable for garments which need to be dried completely, such
as sponges and bathrobes “A4”; appears on the display.
B - Based on a set time period: between 30 and 180 minutes.
If your laundry load to be washed and dried is much greater than the
maximum stated load (see WASH CYCLE TABLE), perform the wash cycle,
and when the cycle is complete, divide the garments into groups and put
some of them back in the drum. At this point, follow the instructions
provided for a “Drying only” cycle. Repeat this procedure for the
remainder of the load.
N.B: a cooling-down period is always added to the end of each drying cycle.
Drying only
Use the cycle selector knob to select a drying cycle (11-12) in accordance
with the type of fabric. The desired drying level or time may also be set
using the DRYING button .
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed bres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash new
coloured garments separately). Delicates (small garments – such as nylon
stockings – and items with hooks – such as bras: insert them in a fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washer-dryer and the
drum. Check all buttons.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus detergent
in your laundry and it saves money by avoiding waste of surplus detergent.
Use low temperature and longer duration
The most ecient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
“Wash Cycle Table” table to save water and energy.
Noise and remaining moisture content
They are inuenced by the spinning speed: the higher the spinning speed
in the spinning phase, the higher the noise and the lower the remaining
moisture content.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washer-dryer o
and disconnect it from the mains power. Do not use ammable liquids to
clean the washer-dryer. Clean and maintain your washer-dryer periodically
(at least 4 times per year).
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washer-dryer and help to prevent leaks.
Unplug the washer-dryer when cleaning it and during all maintenance work.
Clean the washer-dryer
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water. Do not use solvents or
abrasives.
Clean the detergent dispenser drawer
Wash it under running water; this operation should be repeated frequently.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant odours
from forming.
Clean the pump
The washer-dryer is tted with a auto-cleaning pump that does not
require any maintenance. Small items (such as coins or buttons) may
sometimes fall into the protective pre-chamber situated at the base of the
pump.
! Make sure the wash cycle has ended and unplug the appliance.
To access the pre-chamber:
1. remove the cover panel on the front of the machine by rst pressing it
in the centre then pushing downwards on both sides to extract it;
2. loosen the drainage pump cover by turning it anti-clockwise: it is
normal for some water to leak out;
3. clean the inside thoroughly;
4. screw the cover back on;
5. put the panel back in place, making sure the hooks slot in place before
pushing the panel onto the appliance.
Check the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken, it
must be replaced: during wash cycles, the high pressure of the water
could suddenly split the hose open.
! Never use hoses that have already been used.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every
spin and to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the washing
rotation speed. If, after several attempts, the load is not balanced
correctly, the machine spins at a reduced spin speed. If the load is
excessively unbalanced, the washer-dryer performs the distribution
process instead of spinning. To encourage improved load distribution and
balance, we recommend small and large garments are mixed in the load.
ACCESSORIES
Contact our Technical Assistance Service to check whether the following
accessories are available for this washer-dryer model.
Stacking kit
With this accessory you can secure the tumble dryer to the upper part of
your washer-dryer to save space and facilitate loading and unloading of
the tumble dryer.
TRANSPORT AND HANDLING
Do not lift the washer-dryer by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the lling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
“Health & Safety and Installation Guides”.
Loading ...